I want to create an Ai vehicle that I could race with my Initial D AE86, so I start working with a good balance car with good control and no drama~
But it fails! The Ai always turn too sharp and keep spinning after it runs off the track ~

I follow the Ai with my AE86~ So..........
1. Ai don't brake!
2. Ai has its own gyroscope, even you don't give a turning wheel it still turns, but the force is not so great.
3. Ai will hit full turn whatever you gave it.

So I start to fix the problem.

1. Having Jet engine (for low-speed input: V>1)and wing (High speed)for downforce. Making Auto brake by the Jet engine for more downforce during turning, and airbrake to slow down the car. (input: Roll. Min Max: 1)

2. I am not using the Wheel for turning because it will mass up with Ai gyroscopt, I add an extra gyroscope to help it turn, but set a little understeer, so when Ai add up with its' own gyroscope it could have perfect turning.

3. Final Tuning for turn try to make Ai drive on the middle lane, so it could drive on all tracks in SimplePlanes!

What are you doing Ai? (The final two turns in Gold Prix is so hard for Ai)

It works!
I will make a different difficulty for Ai in different colours. White, Green, Blue, Yellow, Red, and Black like on the track day! and there are C, B, A, S, S+ to have more and less speed, so you could have fun with your own vehicle, and it doesn't have Collision, so it won't hit you on the back!

Comment T and I will tag you when I finish the job!