So, one of my jets wings are on hinge rotators for carrier space and stuff. But, the wings flex alot because of this, and, I would like to keep the wing flex (since it's actually realistic), but how do I minimize it?
YES it's on Wing-2 and not Wing-3
maybe you could try flip the rotator. Instead the "base" of the rotator connected to fuselage and the "swinging arm" connected to the wing, try to make the "Swinging arm" to fuselage and "base" to the wing. It more or less works for me at the "jelly like connection" problem when connecting weapon at rotators so it might work in this situation
A friend of mine once fixed wing flex by connecting the tip of the wing to a pilon and the pilon to the base of the wing and before someone says that it's the same as connecting the tip to anything else, this was the final fix after he tried literally everything else.
Hope this helps :)
Increase the general mass of your wing
Try:
-Increase massScale in hinge rotator or wing.
If it is the wing you are trying to minimize the flex on, then maybe it would help if you connected multiple connection points to the rotator. This might not work
You can increase also the
damperMultiplier@DeezDucks I have not actually. Didn't know that could work, I'll test that out and update you on it.
Have you tried increasing the massScale of the hinge rotator
@KPLBall yes. I did. It's the hinge rotators, I'm trying to find out how to minimize the flex.
In XML did you change "Wing-3" to "Wing-2"?
AT List Part 5:
@IDK0
@RepublicofWrightIsles
@Convex
AT List Part 4:
@deaner
@StopBreathingMyAir
@Eagleman101SP
AT List Part 3
@IsaacBB2012
@PigeeGuy
@whizzm1
AT List Part 2
@KPLBALL
@Jaywitsboi
@Halcyon215
Auto Tag List:
@YarisSedan
@f80shootingstarlover
@DynamicHorizon