Profile image

Downforce

112 narwalsk  8.5 years ago

With the newest update I've been making lots of cars. My newest project is to make a formula 1 car. The only problem is that I can't make downforce properly. Can anyone help me with this?

  • Log in to leave a comment
  • Profile image

    I managed to add a small bit of downforce to my car the Manta Racer by adding a lift generating wing in the back. I think what is happening is it is just lifting up the back and thereby pushing the front into the ground but it's working so... yeah. But I'm just a naïve kid.

    7.9 years ago
  • Profile image
    112 narwalsk

    I've started on another project, sorry

    8.5 years ago
  • Profile image
    2,496 Bando89

    can you link me the car?

    8.5 years ago
  • Profile image
    2,496 Bando89

    @narwalsk it worked for me

    8.5 years ago
  • Profile image
    112 narwalsk

    @Bando89 doesn't work

    8.5 years ago
  • Profile image
    2,496 Bando89

    @narwalsk np

    8.5 years ago
  • Profile image
    112 narwalsk

    @Bando89 ok, thank you

    8.5 years ago
  • Profile image
    2,496 Bando89

    @narwalsk give a slight angle to a structural panel. it worked for my BKa-300

    8.5 years ago
  • Profile image
    112 narwalsk

    @Bando89 doesn't work

    8.5 years ago
  • Profile image
    2,496 Bando89

    upside down wings anyone?

    8.5 years ago
  • Profile image
    34.8k BoxGlow

    I have not tested this, but... put wings on the front and the back of the car and rotate them slightly downwards by doing some xml modding or using HellFireKoder's Fine Tuner mod.. It should theoretically force your car downwards as you would want it
    .
    if that fails, put more deadweight at the bottom of the car so its CoM is at the lowest possible place, this would increase the force required to blow the car away from the tracks but it would also decrease its performance

    8.5 years ago