I urgently need a XML modded prop that has two blades and the blade length is long enough for a helicopter I recommend that you do a range of sizes in case one of them is the wrong size PLS listen if you can do it pls post to me unlisted
I urgently need a XML modded prop that has two blades and the blade length is long enough for a helicopter I recommend that you do a range of sizes in case one of them is the wrong size PLS listen if you can do it pls post to me unlisted
Thank you @Feanor for the last model
here
Thank you for everything!!! : )
Thank you @Feanor for all your help : ) There is only one more thing I need you to do and make the Throttle input activation 2 because I cannot touch it without it losing its modded state
If I post it I will credit you
I tried again and it worked : )
oh I'll again but I don't know if it is that because it keeps its length but not power but I will still try again
@Booster456 I have noticed that touching the propeller reverts it back to its pre modded state.
It seems as if my computer is acting different to yours
@Feanor It still wont lift off the ground for some reason
Think I fixed a few issues here
if this gets completed or not thank you for all your help @Feanor
for some reason @Feanor it wont lift the body and also could you make the thickness about 1.2 and also it keeps on nosing over and tailing over
Tell me if you find any issues with this
@Feanor
look at this https://www.simpleplanes.com/a/J0xKOj/Stoprotor
@Booster456 does this work?
@Feanor sorry but I am not trying to be bossy
It needs to be able to lift 13,350lb easily
would this work?
22 long
@Feanor 22 if you measure it using fuselage blocks
@Feanor thats good but it needs to be a bit longer and have more power i'll try a measuring stick
Make a measuring stick.
this?