Step 3: build wings. If your building a modern jet like an f-15 or f-22 your going to make isosceles or scalene triangle wings, this gives the stealth look to a jet if made right. If ur building a old style jet then just make the wing look like a long rhombus.
Step 2: build body- I will try to make it an extension of the nose cone piece that way it is very smooth, but to make things flush with wings on high wing aircrafts, people will change the top most fuselage edge to be smooth so that wing are almost flush with the fuselage.
Another way you can do it is the actually build the air intakes first, and THEN build the main body, if you look at my f-15 I built the air intakes first and then put that body on after, either way is good
So here are the steps that I do, many other people do it differently and there is no right or wrong way to build a jet.
.
1:start with nose cone- I usually use a fuselage blocks that go down to 0 height and width at the end to make the tip, I find fuselage comes are too round
This might help
@Supercraft888 Okay.
Step 3: build wings. If your building a modern jet like an f-15 or f-22 your going to make isosceles or scalene triangle wings, this gives the stealth look to a jet if made right. If ur building a old style jet then just make the wing look like a long rhombus.
@Supercraft888 i do like fighter jets.
okay thanks.
Step 2: build body- I will try to make it an extension of the nose cone piece that way it is very smooth, but to make things flush with wings on high wing aircrafts, people will change the top most fuselage edge to be smooth so that wing are almost flush with the fuselage.
Another way you can do it is the actually build the air intakes first, and THEN build the main body, if you look at my f-15 I built the air intakes first and then put that body on after, either way is good
So here are the steps that I do, many other people do it differently and there is no right or wrong way to build a jet.
.
1:start with nose cone- I usually use a fuselage blocks that go down to 0 height and width at the end to make the tip, I find fuselage comes are too round
Okay, I'll help, I assume ur building a fighter jet so here is my experience