Just follow the instructions I gave you. Don't forget that you can manually change the trim by rotating the horizontal stabilizers with fine tuner. It doesn't really matter what engine combination you use if you trim it correctly.
Alright. Just try to centel the middle engine along the plane's vertical center of mass as much as possible and make the engines with the same thrust. If the plane is still pitching down, you can always just rotate the Horizontal stabilizers a little up to correct it.
you can check out my 727-200 advanced. I don't know if you want to build a trijet with two engines in the front, or all three in the back like a falcon 9X/727. My 727 has engines of all the same thrust, and with the middle engine along the airplane's center of mass (vertically) as much as possible. I know you've already seen that, but here is the link for that:
@TheCreatorandDestroyer99 ok, to create a trijet you must have a medium length fuselage, besides that the 2 wing engines must be slightly more powerful than the tail to maintain flight stability
Thanks. @klm747klm747
and don't forget to make the middle engine EXACTLY centered or the plane will turn.
Just follow the instructions I gave you. Don't forget that you can manually change the trim by rotating the horizontal stabilizers with fine tuner. It doesn't really matter what engine combination you use if you trim it correctly.
hmm? I was joking. @BaconEggs
@TheCreatorandDestroyer99 YOU use 3 engines
I use 2
No u @BaconEggs
use 3 engines
Alright. Just try to centel the middle engine along the plane's vertical center of mass as much as possible and make the engines with the same thrust. If the plane is still pitching down, you can always just rotate the Horizontal stabilizers a little up to correct it.
I want to try to build a plane with the 2 engines on the wings and 1 engine on the vertical stabilizer. @klm747klm747
[Name Here](link here)
Do this when you try to do the link NameHere @klm747klm747
you can check out my 727-200 advanced. I don't know if you want to build a trijet with two engines in the front, or all three in the back like a falcon 9X/727. My 727 has engines of all the same thrust, and with the middle engine along the airplane's center of mass (vertically) as much as possible. I know you've already seen that, but here is the link for that:
https://www.simpleplanes.com/a/0s9DQd/727-200-Advanced
Hmm. Thanks. I’ll let you know if I’m continue with the project. @diegoavion84
@TheCreatorandDestroyer99 ok, to create a trijet you must have a medium length fuselage, besides that the 2 wing engines must be slightly more powerful than the tail to maintain flight stability
Wow. That was fast. But could you clarify please? @diegoavion84
placing 3 engines in a 737