Welcome!
This will be something new from me. A "How it's made"-like weekly forum series, where im gonna share car building techniques with you.
But, to make this whole thing more interesting, i also gonna show an entire car building process step-by-step. That means i'll build a new
Takswagen model, and i will document all building sessions in these little forum posts.I hope it sounds fun, this little introduction wasn't
so rousing as i wanted it to be, but let's just start it.
Basics
There are 8 major steps of creating a car:
1 Planning
This is the starting phase (obviously), where you convert your ideas into actual plans.
EP1 is here
2 Base making
This is the point where the actual building begins. The main frame, the suspension system, and the base chassis work will be added here.
3 Engine
Speaks for itself...
4 Interior
This is the hardest one, not gonna lie. The phase when you build in the whole dashboard, steering wheel, seat, roll cage, etc...
5 Finishing the chassis/Detailing
In this point comes the roof, the exhaust system, the minor details like the small vents, decor elements, spoilers, and such things.
6 Tuning
This is a tricky one. Fine tuning your car's performance, driveability, turning capabilities, and aerodynamic specialities.
7 Testing
This is the fun part. when you finally drive your freshly made full ready car. checking everythig is ok.
(this is also the time for hooning a little bit)
8 Marketing
This is basically the post creating. Creating the story behind the build. This is almost as important as the car itself.
So here we are. the cornestones of the car building. To be clear, this is not the golden rule. People can make awesome cars with different building stages. I'm just want to show the way how do i make the cars that you all like!
The first post will come out tomarrow with the following title:
Building Cool Cars
...and i hopefully can keep this weekly periodicity...
Thanks for reading!
@TakicraftCorporation Thanks for the tips :D
@BdidiCorps supercars are not so easy ones.... The key is to make a good frame. It's hard because you cannot use regular-style suspension setups, because of the flat shaped body. A push-rod or double wishbone configuration can be a good one here but those requires some experience and patience... Also i recommend you to make lot of research and plans (See EP1)
@TakicraftCorporation
Can You tell Me a Tips to make a Supercars/Hypercars?
Please.... :3
Epic
.
This reminds me of the How Is It Made series from Discovery Channel i used to watch as a kid
@destroyerP Thank you ☺️.
This was just the prologue, Stay tuned, today i'll be back with the first chapter about planning.
I love you
Though seriously this helped me a lot.
I have thoughts about building car out of my ideas...
Bookmark
@Sam222156
I think creating the interior first will make everything easy if you are using a bad phone..
@CrashFighter05 This is just the announcement post, I will be more particular in the following "episodes"
This is not helpful, as I do this already.
Now listen closely
Here's a little lesson in trickery
This is going down in history
If you wanna be a Villain Number One
You have to chase a superhero on the run
Just follow my moves, and sneak around
Be careful not to make a sound
(Shh)
(No, don't touch that!)
We are Number One
Hey!
We are Number One
We are Number One
Ha ha ha
Now look at this net, that I just found
When I say go, be ready to throw
Go!
(Throw it on him, not me!)
(Ugh, let's try something else)
Now watch and learn, here's the deal
He'll slip and slide on this banana peel!
(Ha ha ha, gasp! what are you doing!?)
Ba-ba-biddly-ba-ba-ba-ba, ba-ba-ba-ba-ba-ba-ba
We are Number One
Hey!
Ba-ba-biddly-ba-ba-ba-ba, ba-ba-ba-ba-ba-ba-ba
We are Number One
Ba-ba-biddly-ba-ba-ba-ba, ba-ba-ba-ba-ba-ba-ba
We are Number One
Hey!
Ba-ba-biddly-ba-ba-ba-ba, ba-ba-ba-ba-ba-ba-ba
We are Number One
We are Number One
We are Number One
Hey!
Hey!