Profile image

Montage of a Ghost

25.2k JohnnyBoythePilot  5.2 years ago
  • Log in to leave a comment
  • Profile image

    @TheOwlAce
    Ask Andrew about it, they might be disabled on mobile.

    5.2 years ago
  • Profile image
    32.4k TheAceOwl

    @JohnnyBoythePilot yep

    5.2 years ago
  • Profile image

    @TheOwlAce
    Did you come to a complete stop on the elevator ramp?

    5.2 years ago
  • Profile image
    32.4k TheAceOwl

    @JohnnyBoythePilot mobile

    5.2 years ago
  • Profile image

    @TheOwlAce
    Are you on mobile or PC?

    5.2 years ago
  • Profile image
    32.4k TheAceOwl

    @JohnnyBoythePilot yep

    5.2 years ago
  • Profile image

    @TheOwlAce Are all your parts within the red box?

    5.2 years ago
  • Profile image
    32.4k TheAceOwl

    @JohnnyBoythePilot it wont raise my planes up

    5.2 years ago
  • Profile image

    @TheOwlAce
    You just taxi on to the elevator lift/ramp, stop, and wait for it to start & lower or raise you. You also have to make sure ALL parts on your aircraft are within the red outline box. Because the MQ-125A Ghost has a tiny camera set way behind the airplane, to give a fixed rear-forward-looking view that gives an Ace Combat-feel when flying the plane, you have to park the Ghost on the elevator ramp at a very specific angle, or else the ramp won't work because the camera is hanging outside the red box. But that's exclusively a problem with the Ghost.

    5.2 years ago
  • Profile image
    32.4k TheAceOwl

    @JohnnyBoythePilot oops, no i meant the elevator

    +1 5.2 years ago
  • Profile image

    @CptJacobson
    Why, thanks!

    5.2 years ago
  • Profile image

    @CruzerBlade
    Really, you think so? Idk about sexy, but it is a menacing looking drone. It looks like something Skynet would use to take over the world.

    5.2 years ago
  • Profile image

    @JohnnyBoythePilot fancy flyin there cowboy

    5.2 years ago
  • Profile image
    13.1k CruzerBlade

    that is one sexy plane

    5.2 years ago
  • Profile image

    @TheOwlAce
    Attach a launch bar part on the nose or landing gear of your aircraft. When you near the carrier catapult, stop, and press "i" to attach to the launch shuttle. Then press "i" again to launch. The blast deflector ramp will automatically come up, although I noticed it only comes up if you have the launch bar part attached to your plane. You can still launch planes in SP without it, but the ramp won't deploy.

    5.2 years ago
  • Profile image
    32.4k TheAceOwl

    How do you get the ramp to go up like that on the carrier

    5.2 years ago