A few things I would like to add
-3d wings
-Flaps
-Slats
-those things that go up to increase drag
-Reverse thrust
-basic interior(using the test dummy instead of the custom seats usually done)
might be a stretch and I might need some help
Things to fix
-The right wing ripping off during a hard turn
-the tail scraping at full throttle while on the ground
Specifications
General Characteristics
- Created On Android
- Wingspan 112.8ft (34.4m)
- Length 129.0ft (39.3m)
- Height 35.5ft (10.8m)
- Empty Weight 42,286lbs (19,180kg)
- Loaded Weight 89,281lbs (40,497kg)
Performance
- Power/Weight Ratio 1.51
- Wing Loading 72.3lbs/ft2 (352.9kg/m2)
- Wing Area 1,235.2ft2 (114.8m2)
- Drag Points 21387
Parts
- Number of Parts 45
- Control Surfaces 7
- Performance Cost 636
@GIZMOTHECAT ok just do what you need
ok i jumped the gun a little bit, i can really only fix A a few problems, adding my engines helped the wing flex but it still flexes like you want it, i started 3d wings but i am stumped so im gonna let my freinds takeover if they can. i am really only much of a modder. i also fixed the dragging the tail problem by adding my engines and pushing the landing gear back a little.
@Nerfaddict ok, i just set my pc up so im finishing my work.
@GIZMOTHECAT forgot to tell you, don't remove all the wing flex, just enough so the wing don't go
@GIZMOTHECAT perfect
i can fix those other problems too.
I can help with the reverse thrust issue, i make engines from helicopter engines that use VTOL for thrust, VTOL can be used to go slow or fast. just dont change the prop type.