Hello from Crals Avaition inc. i decided to come back from a long break. i have since decided to remake and update older planes and helicopters. since they were made before the days of most of the parts we have now. so this i my take on an AH-64A Apache. here you will see two fully functioning cockpits. pilot in rear, co-pilot/gunner in front. modeled here is flight, weapons and weapons systems. so... 1 drops inner pilon, 2 drops outer pylon. 3 is the pilot night vision sensor on top of nose...(its not really night vision here...) 4 is to salvo missile from rails, 5 is tads sensor package operation with the joystick for searching target areas. 6 is gun aiming by joystick. to stow cannon...activate 6 and pull stick down...and turn it off while holding stick down. this stows cannon in raised position. to unstow, press 6 to re activate. 7 is to activate flight controls. to turn on engines throttle up to about 65 to 75 percent. and use vtol as collective to lift off. 8 is your gyro. turning it off allows for better manual flight control. tunning it on limits the pitch and roll for more basic flight handling. for the third cockpit in the tads sensor allows you to target enemies by steering the sensor reticle onto to the target. it is used for aiming the gun. independently from where you are pointing. well i get this is alot to say. but alot went into it here most recently about 8 weeks ago. it is now ready to dominate the battle space!. cheers.