Unlisted
No Tags
Merry Christmas !
Fixed
First I moved the rotator to the top of the fuselage and reconnected it
Next, under input controller of the rotator I changed the Min & Max from
-1 , 1
To
0 , -1
This stopped the rotator from over rotating the front part of the aircraft. As we only want the rotator to be able to move half it's normal distance.
*The above was the "Big" issue.
Lastly, I inverted the zero and the negative one in the Min and Max settings.
By doing this the fuselage stays shut until activate 2 is pressed.
*If you want the default position to be "open" , then switch those two numbers under Min and Max. Put the negative 1 where the zero is and put the zero where the negative 1 was.
You should be all set my friend !
Z 😸
Specifications
General Characteristics
- Successors 1 airplane(s) +84 bonus
- Created On Android
- Wingspan 189.6ft (57.8m)
- Length 170.6ft (52.0m)
- Height 40.3ft (12.3m)
- Empty Weight 162,666lbs (73,784kg)
- Loaded Weight 337,432lbs (153,056kg)
Performance
- Power/Weight Ratio 1.864
- Wing Loading 64.3lbs/ft2 (313.8kg/m2)
- Wing Area 5,249.4ft2 (487.7m2)
- Drag Points 40019
Parts
- Number of Parts 591
- Control Surfaces 22
- Performance Cost 2,562
@Zaineman Thank you tho
@Zero0Two2 please read description 😺
Z