Profile image

Mammoth Canon

12.5k Flash0of0green  8.4 years ago
122 downloads

VTOL is Canon rotation and trim is canon elevation.

General Characteristics

  • Successors 1 airplane(s)
  • Created On iOS
  • Wingspan 7.0ft (2.1m)
  • Length 24.5ft (7.5m)
  • Height 4.3ft (1.3m)
  • Empty Weight 1,515lbs (687kg)
  • Loaded Weight 1,515lbs (687kg)

Performance

  • Wing Loading 1,502.3lbs/ft2 (7,334.7kg/m2)
  • Wing Area 1.0ft2 (0.1m2)
  • Drag Points 1811

Parts

  • Number of Parts 16
  • Control Surfaces 0
  • Performance Cost 70
  • Log in to leave a comment
  • Profile image
    15.4k Gontar

    @Flash0of0green pas de problème

    7.8 years ago
  • Profile image

    @GontarMotors thanks for the upvote.

    7.8 years ago
  • Profile image
    147k Pilotmario

    @Flash0of0green Ok. I was not planning to procure the turret as of now, but thanks for the advice.

    8.4 years ago
  • Profile image

    Both the tanks bass and Canon armor are fuselage if you screw around with the fuselage on the Canon armor (more specifically it's high) you will expose a rotor that's responsible for the guns elevation from there you can go into the settings options and map it to whatever controls you want. The same principle applies to the fuselage at the tank cannons bass simply decrease the height and It will expose the rotor that's responsible for making the tank Canon rotate from there you can map it to whatever controls you wish. I hope this helps if it's too complicated to follow asked me to explain it in steps.@Pilotmario

    8.4 years ago
  • Profile image
    147k Pilotmario

    How? @Flash0of0green

    8.4 years ago
  • Profile image

    Do you want to know how do I adjust then... The controls that is.@Pilotmario

    8.4 years ago
  • Profile image
    147k Pilotmario

    Unfortunately, these controls would be useless on my tank, for I use VTOL and Trim to maneuver tank.

    8.4 years ago