Profile image

Arsenal VG-33 c1

44.1k ollielebanania  4.5 years ago

For sure one of my favourite french fighter from WWII. Hope you'll enjoy it. Special thanks to WarHawk95 for the MGs. The original specification that led to the VG series was offered in 1936 in order to quickly raise the number of modern aircraft in French service, by supplying a "light fighter" of wooden construction that could be built rapidly in large numbers. The contract resulted in three designs, the VG-30, the Caudron C.714 and the Bloch MB.700. Prototypes of all three were ordered. Named for engineer Michel Vernisse (V) and designer Jean Galtier (G), the VG-30 was all wooden in construction, using plywood over stringers in a semi-monocoque construction. The layout was conventional, a low-wing monoplane that bore a striking resemblance to the later Italian Macchi C.202. Armament consisted of a 20 mm Hispano-Suiza HS.404 cannon firing through the propeller hub, and four 7.5 mm MAC 1934 M39 drum-fed machine guns, two in each wing. The design was supposed to be powered by the Potez 12Dc flat-12 air-cooled inline engine, but this ran into development problems. The prototype was then fitted with a Hispano-Suiza 12Xcrs instead, and flew in this form in October 1938. In order to find some solution to the engine problem, the VG-31 was to use the 632 kW (860 hp) Hispano-Suiza 12Y-31[1] and the VG-32 the Allison V-1710C-15. The VG-31 flew in 1939 and proved to have excellent performance. The prototype VG-32 was completed in 1940 and awaiting its test flight when it was captured by the advancing German forces at Villacoublay. The VG-33 was a modified version of the VG-31 using the same 12Y-31, and first flew on April 25, 1939. It had a surprisingly good performance of 560 km/h (348mph), and was ordered into production with a contract for 220 aircraft in September, later raised to 1,000. Production did not take long to start, but most of the airframes never received engines and sat at the factory when it fell to the Germans.

Spotlights

General Characteristics

  • Created On Windows
  • Wingspan 45.6ft (13.9m)
  • Length 38.0ft (11.6m)
  • Height 14.9ft (4.5m)
  • Empty Weight 16,282lbs (7,385kg)
  • Loaded Weight 21,460lbs (9,734kg)

Performance

  • Power/Weight Ratio 1.57
  • Horse Power/Weight Ratio 2.329
  • Wing Loading 70.3lbs/ft2 (343.1kg/m2)
  • Wing Area 305.4ft2 (28.4m2)
  • Drag Points 6566

Parts

  • Number of Parts 197
  • Control Surfaces 6
  • Performance Cost 700
  • Log in to leave a comment
  • Profile image
    41.8k Ren

    Final awards. Congrats on 1st

    4.1 years ago
  • Profile image

    @asteroidbook345 yeah

    4.5 years ago
  • Profile image

    @CalebRepublic No i use disignersuite and just edit the screenshots on SonyVegasPro 17

    4.5 years ago
  • Profile image

    do use the screenshots mod for your screenshots?

    If so, how do you edit them

    4.5 years ago