Profile image

1930's Naval Biplane Fighter v1.0

17.4k karlosdarkness  9.4 years ago
1,830 downloads
No Tags

In the period between the two world wars naval aviation really began to develop. This open cockpit biplane has great agility and the ability to approach and fly off a carrier at really low speeds but would soon be superseded by faster more heavily armed monoplanes. Activate group 1 and pull the slider down to put the wings in place for flight, the prop will turn as long as you have power on and don't go to 100% power.

Spotlights

General Characteristics

  • Successors 2 airplane(s)
  • Created On Android
  • Wingspan 26.2ft (8.0m)
  • Length 37.6ft (11.5m)
  • Height 13.8ft (4.2m)
  • Empty Weight 6,191lbs (2,808kg)
  • Loaded Weight 9,025lbs (4,093kg)

Performance

  • Power/Weight Ratio 1.493
  • Wing Loading 10.2lbs/ft2 (49.6kg/m2)
  • Wing Area 887.8ft2 (82.5m2)
  • Drag Points 3517

Parts

  • Number of Parts 121
  • Control Surfaces 9
  • Performance Cost 391
  • Log in to leave a comment
  • Profile image
    258 stormy780
    Ok thanks :)@karlosdarkness
    9.3 years ago
  • Profile image
    @stormy780 Feel free to use the props
    9.3 years ago
  • Profile image
    258 stormy780
    Would you mind if I used and experimented with your prop engines from your planes?@karlosdarkness
    9.3 years ago
  • Profile image
    258 stormy780
    Ok thanks I see how you got the wings to fold in the comments @karlosdarkness
    9.3 years ago
  • Profile image
    @Stormy780 many thanks for rating, the answer to your question is in the comments above.
    9.3 years ago
  • Profile image
    3,690 LjSpike
    @Karlosdarkness thanks, that'll help a lot.
    9.3 years ago
  • Profile image
    258 stormy780
    Great plane! In the air it looks and flies great! I was wondering how you got the wings to fold???? Thanks for the great plane!
    9.4 years ago
  • Profile image
    @LjSpike mk2 just uploaded with better air breathing
    9.4 years ago
  • Profile image
    3,690 LjSpike
    @karlosdarkness Pretty much. Yeah. Preferably not needing additional inlets
    9.4 years ago
  • Profile image
    @LjSpike you are more than welcome to pull the rotators and wings off this if they can help just you have to understand that each plane requires a fair amount of work to get the wings to work correctly and you cant mirror the plane so save the bits as sub assemblies. As for the TJet are you looking for a cylinder with the jet embedded?
    9.4 years ago
  • Profile image
    @letsgofast11 @ramjet many thanks.
    9.4 years ago
  • Profile image
    3,690 LjSpike
    @karlosdarkness Beautifal! It'd be really nice if you'd make a pack of some wings attached to rotators, and I could really do with an efficient >LARGE< prop (turboprop) with an modded higher power prop hidden inside of it.
    9.4 years ago
  • Profile image
    11.7k letsgofast11
    Awesome☺
    9.4 years ago
  • Profile image
    6,432 Me600
    @karlosdarkness sorry I didn't read above posts
    9.4 years ago
  • Profile image
    @Me600 as explained two posts above its all black magic.
    9.4 years ago
  • Profile image
    6,432 Me600
    This plane is Great! Please tell me how you do the rotating wings
    9.4 years ago
  • Profile image
    @Walrus aircraft feel free to alter as you see fit, just be careful not to make it too fast as that's why I left it with restricted airflow 200mph seems about right for the period.
    9.4 years ago
  • Profile image
    I finally got to try it, and it works in beta. I digg your design. I have some ideas on how to make this better. Simple mods that can improve things. For example, modded intake position to remove the air issue, modded COM, modded thrust port angle. Let me know if you are interested in exploring these.
    9.4 years ago
  • Profile image
    @WaterAirLand - black magic..... modded xml file to adjust the attachment point on the rotator and then it really is just a case of rotation and building. I personally blame @WalrusAircraft he's the first person I saw create the modified rotator and without him a third of my stuff would be wingless, without propellers or landing gear free.
    9.4 years ago
  • Profile image
    50.4k Stingray
    Lot of torque to overcome post-takeoff. Still worked, though.
    9.4 years ago
  • Profile image
    50.4k Stingray
    Creative. Launched off the USS Tiny with this!
    9.4 years ago
  • Profile image
    Folding the wings in mid-flight is cool...
    9.4 years ago
  • Profile image
    77.9k Cedy117
    Go right ahead@karlosdarkness
    9.4 years ago
  • Profile image
    @Cedy117 can I have a play with the wings on your Helldiver see if we could get the wings to fold?
    9.4 years ago
  • Profile image
    @blueangelproduction rather than reinvent the wheel here's a rather lovely Dauntless; https://www.simpleplanes.com/a/1mOq1I/SBD-Dauntless
    9.4 years ago
  • Log in to see more comments