Rhea Industrial
Well if you have ever wondered how one can get a 100,000 dollar shipping fee this is how you get that. Steps for flying goes as follows 1. For vtol takeoff activate groups 1 and 2 put vtol in DOWN posistion and ensures props are 90 degrees perpendicular to fusealage . After this increase throttle to 100 percent and moniter aircrafts foward and back drift 2. Once you have reached about 1000 feet put props to 45 degree angle relitive to fusalage and activate 3 ( jets will powerup ) and procead to maintain about a 15 degree angle of attack clearing terrain . Once at 180 mph deactiave 1 , not 2 PROPS STAY ON and center your vtol controls . 3. Landing , once at 1500 feet above terrain put throtles to fifty percent and cut jets while activating 1 . Once at 100 mph put back in vtol config , Also if you are going fast you can put props at a 93 degree angle and slow down . 7 drops container . HAVE FUN
Specifications
General Characteristics
- Predecessor Tilt Rotor Challenge (closed)
- Successors 2 airplane(s)
- Created On Windows
- Wingspan 135.5ft (41.3m)
- Length 154.2ft (47.0m)
- Height 47.8ft (14.6m)
- Empty Weight 55,710lbs (25,269kg)
- Loaded Weight 79,506lbs (36,063kg)
Performance
- Power/Weight Ratio 0.847
- Horse Power/Weight Ratio 0.15
- Wing Loading 35.7lbs/ft2 (174.4kg/m2)
- Wing Area 2,225.9ft2 (206.8m2)
- Drag Points 38094
Parts
- Number of Parts 220
- Control Surfaces 5
- Performance Cost 1,071