This is heavily based on War thunder La-5FN featured in "Victory is ours" Mini movie, I have tried to get accurate colors, simply by using Eye dropper, Getting RGB values, Getting the right HTML code then Putting them on XML the problem is that the designer changes the tone completely

Controls:

-Throttle: controls the propeller and changes the radiator configuration (closed for more speed, which is just for visuals)
-VTOL down: Flaps
-Trim Up: "piston" wheel brakes(Read the caution section)
-Landing gear button: for retracting and extending The landing gears
-AG1=Nothing
-AG2=Nothing
-AG3=Nothing
-AG4=Nothing
-AG5=Nothing
-AG6=Navigation lights
-AG7=Locking/Unlocking The Tail wheel
-AG8=Nothing

Caution:

-Don't use the "piston" wheel brakes if you didn't achieve a successful touchdown (no bouncing), when A successful touchdown have been achieved and your speed isn't above 100-140 Mph you can use it

Sorry for mentioning basic controls and such, I am trying to help new people

Take-off procedures:

-Trim up and start your engine, wait 5 seconds or more >Optional<(it brings Flight simulator feels, it doesn't affect the plane in any kind of way)
-Start your engine by simply Throttling up
-Flaps down into Take-off/Landing position simply VTOL Down
-Pitch Up always until you achieve a successful take off
-Retract Landing gear when your plane is at an appropriate altitude by simply pressing The "Gear button" no complicated Activation groups and VTOL/trim

Landing Procedures:

-Flaps down into Take-off/Landing position
-Align onto The runway, preferably it should be straight
-Throttle down Slowly or to 60% of Throttle if you are Little bit far away, if you are close to the Runway, Cut off the engine (0% Throttle)
-Extend landing gears
-Pitch up if needed
-Roll/pitch to lose momentum>Optional< (But it's risky)
-use air brake depending on your speed
-Descend to the runway Altitude, and keep pitching up if needed, flaps will help a lot
-achieve a successful Touchdown
-Trim Up for Hard brakes, It is risky, sometimes in other words something wrong rarely happens
-All done, Welcome back home!

First of all I' had been working on this for a real while but many issues and bugs hit me, I have about 30+ parts that are causing unequal drag, you can notice them especially in the cockpit frames and landing gear, so I didn't upload it and tried to improve the situation, I have reworked many parts to remove the drag, but 2 days later, it happened again, so taking off is hard unless you pitch up and use flaps. So, long story short, This build is heavily unstable yet it can fly good if the speed is above 250 Mph and you are not losing much of energy

Apologizes:

There are two elements which are missing, and one detail that is wrong,

-I didn't want to Make IAP guard insignia because it is complex and consists of 16 part star, and other details which are about 10 parts, Making 52 parts just for small little insignia plus there is a high chance of more drag issues

-I didn't add Aerial Kills, the pilot is seen with 7 Confirmed aerial kills, so since each star is 16 parts, this means that placing them on one side would 112 parts, add to that weight, and even if weightless I would face drag, so in total the aerial kills would consist of 224 parts, a huge amount of drag and possible drag issues
-Propeller Blade Tips are white but in the video the whole blade is black, it is not my fault because trim one is a major part of the engine, choosing white makes the engine front white alongside the blade tips

Links:

-The trailer: Https://www.youtube.com/watch?v=VTzHj-R9McA

-Muslim Magomaev, Don't Hurry up: https://www.youtube.com/watch?v=yCPibRZbA9c

-Source: The video and this Skin at http://live.warthunder.com/post/129258/

Have Fun! Enjoy :D