J1 Tilt Rotor series
30 Interstellar1277
7.0 years ago
Final of the J1 series!
This ones tricky, if you do it wrong, you'll always flip it over.
1. Throttle up to 27-30%, while doing so, tilt the nacelles forward slightly.
2. Once getting a forward motion, throttle up to 40-43%. While doing so, trim your elevator down.
3. Once having a steady forward motion of 120 or more, throttle up slowly.
The more your nacelles lower at a slower speed, your nose will dip down. Keep gaining speed, and once you have your nacelles fully retracted, you should be able to sustain a steady flight with elevator trimmed down.
4. To land, ha good luck ;)
Specifications
General Characteristics
- Created On iOS
- Wingspan 46.3ft (14.1m)
- Length 36.8ft (11.2m)
- Height 15.0ft (4.6m)
- Empty Weight 13,955lbs (6,330kg)
- Loaded Weight 15,968lbs (7,243kg)
Performance
- Horse Power/Weight Ratio 0.563
- Wing Loading 62.9lbs/ft2 (307.2kg/m2)
- Wing Area 253.8ft2 (23.6m2)
- Drag Points 9729
Parts
- Number of Parts 231
- Control Surfaces 8
- Performance Cost 839