FN-35 Valkyrie HUD
FN - 35 Valkyrie in the “Vampire” Livery
With full HUD and Interior
Controls:
Normal Flight Controls
Gear - gear
Trim - trim
Vtol - Flaps
Activate 6 - Landing Assist
Activate 7 - Canopy
Activate 8 - Lights
Landing Instructions:
This plane is made for smooth landings with limited corrections. When approaching corrections to pitch should be done using flaps.
Spawn at “Wright Approach” to practice getting used to landings
1) Line up to runway (If in Freeflight)
2) Activate 6 / Reduce Throttle to 10 %
3) Use flaps to adjust pitch (So you don’t mess up alignment after you line up with the runway)
4) Once reaching 700 ft gradually pull vtol down (Aim to touch back gear first and on hash marks)
5) Flare by pulling vtol down the rest of the way (important) and cut power / Deactivate 6 on rollout
Landing with HUD / Cockpit View:
1) Line up to runway (If in Freeflight)
2) Activate 6 / Reduce Throttle to 10 %
3) Use flaps to aim the “W” on the black part at the beginning of the runway
Use flaps / VTOL (So you don’t mess up alignment after you line up with the runway)
4) Once reaching 700 ft gradually pull down VTOL to aim the “O” on where you want to land
5) Once below 300 pull VTOL all the way down to slow descent
6) Deactivate 6 on rollout
Note:
I know there are a lot of instructions but this is the suggested way to have the smoothest landing possible. Of course you can use your own method if it works better for you.
Any critique at all is greatly appreciated
Thanks!
Specifications
General Characteristics
- Predecessor HUD Collection and a Radar (Parts)
- Created On iOS
- Wingspan 36.8ft (11.2m)
- Length 44.1ft (13.4m)
- Height 11.1ft (3.4m)
- Empty Weight 8,905lbs (4,039kg)
- Loaded Weight 17,192lbs (7,798kg)
Performance
- Power/Weight Ratio 3.921
- Wing Loading 77.5lbs/ft2 (378.6kg/m2)
- Wing Area 221.7ft2 (20.6m2)
- Drag Points 5484
Parts
- Number of Parts 129
- Control Surfaces 8
- Performance Cost 848