This is Gamlin's VF-22 in " Macross 7 Dynamite". You can change its paint to Max's (blue), Milia's (red) or Hayete Immelmann's father, Wright Immelmann's (check it out in "Macross Delta"). Please read this instruction before flight. Remember, all the transformation has to be performed in the air. To transform into gerwak mode, activate AG7 and pull down the trim lever, then the entire back will lift up. After that, close AG7, put the trim lever to netural position, then activate AG1,3,4,5 and pull down VTOL lever slowly. Then set VTOL lever back to netural position and activate AG7 to reset the back. Then close AG7, pull the VTOL lever all the way down then activate AG4 to use trim to adjust the ankle so that it can stand in gerwak mode. To transform to battroid mode, activate AG7 then pull down the trim lever to lift up the back. Then close AG7 and set trim to netural position. After that, activate AG2,3,4,5, pull down VTOL lever to half complete the transformation. Then close these groups, pull down the trim lever, set VTOL netural, activate AG7, then slowly pull down VTOL lever to complete body transformation. You can then close AG7 and activate AG4 to use trim to adjust the ankle. AG6 with VTOL is for elbow. AG8 with trim is for the VTOL nozzle at the back of the aircraft. Hope you enjoy! Special thanks to anymoon.com for their transformation guide which helped me to understand the structure of the toy. If you have any questions, please leave a comment and I'll answer.