Tsar Tank
The Tsar Tank, was an unusual Russian armoured vehicle developed from 1914 onwards. The project was scrapped after initial tests deemed the vehicle to be vulnerable to artillery fire.
It differed from modern tanks in that it did not use caterpillar tracks—rather, it used a tricycle design. The two front spoked wheels were nearly 9 meters (27 feet) in diameter; the rear-mounted third wheel was only 1.5 metres (5 feet) high. The upper cannon turret reached a height of nearly 8 meters. The hull was 12 metres wide with two more cannon in sponsons. Additional weapons were also planned under the belly. Each wheel was powered by a 250 hp Sunbeam engine.[1]
The huge wheels were intended to cross significant obstacles. However, due to miscalculations of the weight, the rear wheel was prone to getting stuck in soft ground and ditches, and the front wheels were sometimes insufficient to pull it out. This led to a fiasco of tests before the high commission in August 1915. The tank remained in the location where it was tested, some 60 kilometres from Moscow until 1923 when it was finally taken apart for scrap.
use WASD for drive and 1-2 for central turret use
Specifications
General Characteristics
- Predecessor 'The Tanks of the Great War' Challenge(EXTENDED)
- Created On Windows
- Wingspan 23.1ft (7.0m)
- Length 31.0ft (9.5m)
- Height 16.9ft (5.1m)
- Empty Weight 63,108lbs (28,625kg)
- Loaded Weight 64,608lbs (29,305kg)
Performance
- Wing Loading 48,018.5lbs/ft2 (234,446.8kg/m2)
- Wing Area 1.3ft2 (0.1m2)
- Drag Points 16752
Parts
- Number of Parts 262
- Control Surfaces 0
- Performance Cost 787
12 of 20
This is one of my favorite experimental tanks. Nice work.