Testing out some alternative suspension settings. Finally came up with a buggy chassis utilizing some things like negative camber front and rear, toe out for the front wheels and toe in for the rears to increase cornering and stability. For this version I just used a simple solid floating rear axle with track-link. The dual shock setup in the front took forever to make it work right and it could still probably use some tweaking but it is quite good now. I am sure the suspension could be carried over and modified to suit a lot of different vehicles. For this one I used yaw for throttle to get easy forward/reverse action as well as being able to use the brake and throttle at the same time but you can set it up however you like. Enjoy!
Specifications
General Characteristics
- Successors 1 airplane(s) +42 bonus
- Created On Windows
- Wingspan 11.8ft (3.6m)
- Length 16.8ft (5.1m)
- Height 5.5ft (1.7m)
- Empty Weight 2,726lbs (1,236kg)
- Loaded Weight 2,859lbs (1,296kg)
Performance
- Wing Loading N/A
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 2107
Parts
- Number of Parts 79
- Control Surfaces 0
- Performance Cost 651
Conventional?
The AI only controls (throttle=throttle)
(Roll=steering) so that's conventional
@Djjam
Dude I luv your modded toe and the suspension but I would like
It more if you had done a conventional control setup (pitch=throttle) (yaw=steering)