Notes:
-10-15% throttle for realistic speeds
-Credit to EternalDarkness for the machine gun on the turret
-I'm sorry I can't remember who made the muzzle, but they also made a Stridsvagn (check it out)
Armament:
-One 120mm smoothbore autoloading main cannon
-One .30 caliber machine gun (imported from the USA)
History: The AMX-Stridsvagn EHT-55D Faucon (H56 Falk for the Swedish) was an attempt at a joint project between the two companies. AMX made almost all of the components for the hull and track system and Stridsvagn made the turret. Testing proved that the tank was very good at medium to long range engagements but because of slow turret traverse speeds close engagements were not recommended. France received five tanks and Sweden received four, seeing as the costs to build the tanks were high. Eventually, the project was canceled and the remaining vehicles were scrapped.
Specifications
General Characteristics
- Created On iOS
- Wingspan 10.7ft (3.3m)
- Length 37.5ft (11.4m)
- Height 13.9ft (4.2m)
- Empty Weight 6,054lbs (2,746kg)
- Loaded Weight 6,054lbs (2,746kg)
Performance
- Wing Loading 439,839.3lbs/ft2 (2,147,483.6kg/m2)
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 7136
Parts
- Number of Parts 213
- Control Surfaces 0
- Performance Cost 859
The Rammjager is uploaded now! @Planenerd2006
Yes, I will make rammjager-ish plane. And I will probably do both versions as well. @Planenerd2006
Noice
Can you make a Gotha Rammjager now, to find info on this plane go to luft46 and go to the oddities section and then click on the rammer, there are 2 versions, one with a normal cockpit and one with a teardrop shaped cockpit on top of the fuselage. I suggest you make both of them one after the other.
You're aware of that AMX and FCM where separate design bureaus, and that it would simply receive a number after the Strv if in Swedish service?
Merry Christmas!