P-38
165 GoldenAviationYT
10 months ago
I made this really bad replica of the P-38 Lighting. This is my very first time publishing an aircraft, so if you have any tips or recomendations, please let me know thanks! I recomend to take-off with flaps half-way down, and trim also around half.
Specifications
General Characteristics
- Created On iOS
- Wingspan 53.9ft (16.4m)
- Length 23.7ft (7.2m)
- Height 13.0ft (4.0m)
- Empty Weight 7,667lbs (3,477kg)
- Loaded Weight 8,730lbs (3,960kg)
Performance
- Horse Power/Weight Ratio 0.229
- Wing Loading 38.9lbs/ft2 (189.9kg/m2)
- Wing Area 224.5ft2 (20.9m2)
- Drag Points 2271
Parts
- Number of Parts 75
- Control Surfaces 7
- Performance Cost 512
@GoldenAviationYT Np. The reason to use 0 drag is because the physics of simpleplanes is really weird, so it leads to a lot more drag than normal, and using 0 means less engine power leading to more realistic planes. the blueprints can be found by clicking on the eye on the sidebar and selecting what looks like a map. you can upload pictures from there
@Kaveman Thanks! This helps a lot!
few tips-use fuselage blocks for pretty much everything, and make sure to set the drag of each fuselage block to 0, using xml. work on custom cockpits and landing gear, as they are pretty simple and help a lot. Finally, you can use blueprints if you want it to be as close to the plane as possible.