This is a challenge I thought of, the plane *must* be less than 30 ft long and less than 20 ft wide. Also, it needs to weigh less than 7,000 lb and it must be a successor. No more than 200 parts. Good luck!
Specifications
General Characteristics
- Successors 1 airplane(s) +42 bonus
- Created On iOS
- Wingspan 11.2ft (3.4m)
- Length 11.5ft (3.5m)
- Height 5.6ft (1.7m)
- Empty Weight 2,366lbs (1,073kg)
- Loaded Weight 2,366lbs (1,073kg)
Performance
- Power/Weight Ratio 1.424
- Wing Loading 53.3lbs/ft2 (260.2kg/m2)
- Wing Area 44.4ft2 (4.1m2)
- Drag Points 381
Parts
- Number of Parts 13
- Control Surfaces 5
- Performance Cost 47
Yep.@Alienbeef0421
Nothing beats a flying cockpit :P
That's good. @Geekpride
That's better - my Phippri is now up as a successor. It's still got quite a short range, but it can make it from Yeager to Wright.
Maybe the limit can be 7,500 lbs! :D@Geekpride
Is the 7000 lbs limit the empty weight of the loaded weight? I've got a design for this. It weighs less than 7000 lbs with a little bit of fuel in, but to give it a decent flight time I'd need to add more and that would take it over 7000 lbs.