Profile image

Campini-Caproni C.C.2 (FIctional Fighter version)

48.9k Baldovino  5.5 years ago

The C.C.2 was never weaponized, and it never entered in combat, but this is the version that Italians was dreaming. Fast, agile and weaponized. Based on my old replica.










AG8 = Afterburner ON/OFF
VTOL DOWN = Flaps
TRIM = TRIM
B = Brakes

* ENGINES *

The aircraft was equipped with a piston engine to compress air instead of a compressor activated by a turbine in the combustion gases. In practice it had a ducted fan and a post combustor. He could fly with the post-combustor off, albeit with limited performance. All this has been reproduced. You can fly with AG8 disabled or enabled.

* TRIM *

You must operate trim continuosly, based on speed and/or AG8 enabled or not

* TAKE OFF *

AG8 enabled to have the post combustor, VTOL completely lowered to fully extend the flaps

(The plane takes off also without flap and / or with only the piston engine but sometime do strange things)

* LANDING *

Extend the flaps, switch off the combustor, and approach with the piston engine approx. 20%. Near the track, use the brakes (which will switch off the engine) and glide gently. If you have to reattach, give 100% thrust and close gear keeping the flaps extended.

* FUEL *

There is no infinite supply of fuel. It is abundant, but you still have to deal with it. If you plan a very long transfer, switch off the post combustor.

* CREDITS *

Aviowncorp for the help to solve a problem with the suspensions with the replica version.

Spotlights

General Characteristics

  • Created On Windows
  • Wingspan 31.0ft (9.4m)
  • Length 26.6ft (8.1m)
  • Height 9.2ft (2.8m)
  • Empty Weight N/A
  • Loaded Weight 2,898lbs (1,314kg)

Performance

  • Power/Weight Ratio 1.162
  • Horse Power/Weight Ratio 0.689
  • Wing Loading 11.1lbs/ft2 (54.0kg/m2)
  • Wing Area 262.0ft2 (24.3m2)
  • Drag Points 1484

Parts

  • Number of Parts 195
  • Control Surfaces 17
  • Performance Cost 981
  • Log in to leave a comment
  • Profile image
    56.2k AviownCorp

    @Baldovino as I have stopped uploading planes, but I will upload again if only you post a challenge!

    5.5 years ago
  • Profile image
    48.9k Baldovino

    @AviownCorp at present I can't guarantee the time for a good work in a challenge

    5.5 years ago
  • Profile image
    56.2k AviownCorp

    @Baldovino I have seen lots of challenges but none like yours. Can you please open a challenge?

    5.5 years ago
  • Profile image
    48.9k Baldovino

    @AviownCorp My pleasure, mate. :)

    +1 5.5 years ago
  • Profile image
    56.2k AviownCorp

    Thank you for mention!

    5.5 years ago
  • Profile image
    48.9k Baldovino

    @Carbonfox1 thanks

    5.5 years ago
  • Profile image
    2,910 Liquidfox01

    Ayy i remember this build when you first posted it, nice to see you've improved it

    5.5 years ago
  • Profile image
    1,218 F1boss2018

    Wow nice I can’t build anything near as good as that.

    5.5 years ago
  • Profile image
    48.9k Baldovino

    @XBoxPlays it's a minigun, scaled to be flat like a coin, and with no damage. The brust is adapted to match as possible the brust of the wing's machineguns. The changement are done via XML code. You can freely use the modded minigun in your project.

    5.5 years ago
  • Profile image
    1,055 XBoxPlays

    @Baldovino How do you make those shells ??? It's unbelievable !

    5.5 years ago
  • Profile image
    48.9k Baldovino

    @SakuraSaku thanks
    @XBoxPlays never surrender! :D

    5.5 years ago
  • Profile image
    1,055 XBoxPlays

    Can't compete with you...

    5.5 years ago
  • Profile image
    8,916 SakuraSaku

    awesome!

    5.5 years ago