No Tags
I didn't use a blueprint or anything, this is more of a faithful recreation. I went a bit crazy with the cockpit dials, they are completely custom. Also it has a fly-by-wire system for improved stability. I don't own a VR headset so I don't know if it's good for it but in theory it should work.
The engine is a bit above the CoM so avoid stall climbing or you might spin out. It doesn't stall very easily thanks to fly-by-wire, but if it does it can easily start tumbling or spinning. If you can't recover, flip the recovery chute switch (or number 1 key). Click again to cut the chutes once the nose is pointing down.
Specifications
General Characteristics
- Created On Windows
- Wingspan 35.7ft (10.9m)
- Length 29.1ft (8.9m)
- Height 10.9ft (3.3m)
- Empty Weight 6,479lbs (2,939kg)
- Loaded Weight 7,205lbs (3,268kg)
Performance
- Horse Power/Weight Ratio 0.108
- Wing Loading 20.4lbs/ft2 (99.4kg/m2)
- Wing Area 354.1ft2 (32.9m2)
- Drag Points 1947
Parts
- Number of Parts 76
- Control Surfaces 10
- Performance Cost 494
