I saw some vids of flying cars, so i thought, i should make one myself! So.. here it is!! I've worked for about 3 hours on this straight and maby even more, so i hope it deserves an upvote!
Controls:
VTOL down-fold out wings
ag1-navigation lights
Ag2-enable driving(pitch forward and backwards, roll steering)
Ag3-driving lights.
Specs:
topspeed: in air flying leveled: ~280 mp/h.
diving: ~300 mp/h
driving: ~125 mp/h (You can achieve this speed by putting pitch up, the de-activating ag2 and only steer with roll)
With jet engine used on ground: ~260 mp/h (You can achieve this speed by putting pitch up, the de-activating ag2 and only steer with roll)
stall speed: ~125 mp/h
Hope you like it! Enjoy!!
INSPIRED ON THE REAL FLYING CAR PROTOTYPE AEROMOBIL 3.0, also got the logo of the real car at the front, normally it would have a prop, but the prop engine was too weak, so i used a jet
Specifications
General Characteristics
- Successors 2 airplane(s)
- Created On Windows
- Wingspan 8.7ft (2.6m)
- Length 29.2ft (8.9m)
- Height 6.7ft (2.1m)
- Empty Weight N/A
- Loaded Weight 2,796lbs (1,268kg)
Performance
- Power/Weight Ratio 1.205
- Wing Loading 26.0lbs/ft2 (126.8kg/m2)
- Wing Area 107.6ft2 (10.0m2)
- Drag Points 3874
Parts
- Number of Parts 62
- Control Surfaces 6
- Performance Cost 315
looks Coll i try it
@benjiboyy06 ok
@Boogly777 check the description
Why did you use a jet engine instead of prop
@Flyoneplays ah, thanks though
@benjiboyy06 I yes same problem with me but rpm worked out 🙂
Noice
@Flyoneplays Thankyou for the tip! though i have overload and also tried to increase prop power, but it just wouldn't take off. thanks though!
Very nice job . Great spécial plane .
Use overload mod to increase prop power😃