Auto Credit Based on MrCarrot's Remodel challange!
This is a re-modeling of the original Jundroo's seaplane, I do not use too many extra parts but just "reposition" the old parts mostly. And I need more power so adding more blades to the prop (the engine is already at 2000hp at its max)
INSTRUCTION:
TAKE OFF: pull the Pitch all the way down to during water takeoff. This plane is much easier to handle than the original one. Try both of them and compare -
IF YOU WANT TO RE-MODLE THIS:
If you incidentally move or reposition the parts in Edit/built mode, the plane will not fly well. Take care with that, since I have moved/rotate some parts for 1-2 degrees to balance out aerodynamics and physics.
Landing speed 100 -120 mph, takeoff around 160mph
Specifications
General Characteristics
- Predecessor Remodel challange!
- Created On iOS
- Wingspan 53.0ft (16.1m)
- Length 32.9ft (10.0m)
- Height 15.7ft (4.8m)
- Empty Weight 5,820lbs (2,640kg)
- Loaded Weight 7,151lbs (3,243kg)
Performance
- Horse Power/Weight Ratio 0.279
- Wing Loading 13.1lbs/ft2 (64.1kg/m2)
- Wing Area 544.4ft2 (50.6m2)
- Drag Points 2964
Parts
- Number of Parts 49
- Control Surfaces 7
- Performance Cost 307
3rd place
Thank you guys for the Upvotes!
@DARZAVIATIONOFICIAL
@CinnamonCBF
@BeastHunter
@jamesPLANESii
@Melogi
@AirCrashInvestigationFLR
@CarrotSlicingCat no problem.
@WinsWings sorry I do that so I don’t pick favorite
@WinsWings I don’t download the entry’s until judging time
Thanks @CinnamonCBF
@CarrotSlicingCat Thank you so much. Please try, this flies better than the original
Amazing work I will judge it at the start of march