Helicopter model based on previous model Ra-H-8:
Ra-H-8

Fuel capacity: 212 gal

New features:
- Changed cockpit;
- Model length had become longer;
- Changed skid-equipped landing gear;
- Improved stability;
- Possibility of landing on "Destroyer" helipad (for experienced pilots).

Additional Equipment:
1 x Beacon Light Slow Blink Style [Activation Group 1]
2 x Beacon Light Steady Blink Style [Activation Group 1]

How to fly:
1) Start engines (Minimum power value for main rotor- 25%, for tail rotor - 5%, throttle input)
2) To take off after engines start, use VTOL input to gaining altitude. Move cursor in the upper position.
3) To fly, use pitch input, roll input and yaw input. Use VTOL input to significant change in altitude. To descend use VTOL input and move cursor to the neutral (central) position direction. It is not recommended move cursor below neutral (central) position level during flight at high altitude.
4) To maintain minimum altitude above flat land surface or flat water surface, use VTOL input and move cursor in position with second from the top mark.
5) To land, use VTOL input and smoothly move cursor in the neutral (central) position. Helicopter will begin to lose altitude slowly. Control your rate of descent! If you need to press on helicopter to landing site move cursor below neutral (central) position.
6) After landing if you need power down engines.

Fly and enjoy!