L-15 Falcon
Description under construction:
ABOUT THE AIRCRAFT
Hongdu L-15 Falcon - Advanced Jet Trainer
The Hongdu L-15 Falcon is a Chinese supersonic training and light attack aircraft being developed by Nanchang-based Hongdu Aviation Industry Corporation (HAIG) to meet the Chinese People's Liberation Army Air Force (PLAAF) and People's Liberation Army Naval Air Force (PLANAF) lead-in fighter trainer (LIFT) requirements.
CONTROLS
Afterburner
Action group 1 will engage the engine afterburner. Aircraft will break mach1 at 5000ft.
Lights
Action group 2 for all lights.
Landing Gear
Action group 3 toggles the gear door and landing gear lock
Upon opening gear door, press landing gear to release gear.
Flaps and Slats
VTOL down for flaps and slats.
Elevator Trims
TRIM down or up to trim elevators.
Ejection seat
Action group 6 toggles the rocket motors used to eject. Disengage once seat clears the cockpit.
Action group 7 deploys the chute.
Landing
The aircraft HUD has a runway alignment system. Maintain 10% throttle and full flaps to maintain stability at lower speeds. Use trim accordingly. Use the runway alignment system and fly the two green lines to match the runway.
Blueprint matching
About 90% match.
Click me to view
Note that the blueprint I used and the variant I built are slightly different.
VERSIONS
If you cannot run this, click a version that is right for you.
1139 parts
1039 parts
769 parts
Placeholder title
placeholder heading
placeholder text
Specifications
General Characteristics
- Predecessor Trainer Challenge [CLOSED]
- Successors 1 airplane(s)
- Created On Windows
- Wingspan 30.5ft (9.3m)
- Length 43.2ft (13.2m)
- Height 16.0ft (4.9m)
- Empty Weight N/A
- Loaded Weight 37,330lbs (16,932kg)
Performance
- Power/Weight Ratio 5.779
- Wing Loading 21.9lbs/ft2 (106.9kg/m2)
- Wing Area 1,705.4ft2 (158.4m2)
- Drag Points 8287
Parts
- Number of Parts 1374
- Control Surfaces 8
- Performance Cost 7,247
@CR929thenewSPplayer 我也是
我来考古了: )
F-16 但教练版
北京市朝阳区。@JFLHG
我亲爱的中国朋友你家乡在哪
@Chinanbnb 😂
@BaconAircraft 你差点让我以为是外国人
我是中国人、八岁出国去的加拿大上学。中文说的不好。@Chinanbnb
@BaconAircraft 学中文几年了?生活在这里的外国人而且还玩这款游戏的外国人很少哦。(How long have you been learning Chinese? There are very few foreigners living here and playing this game.)
@LEweirdplanesIt was designed and manufactured in HongDu(Jiang Xi Nan Chang)
@LEweirdplanes I lived in China for about 9 years. To my knowledge they're different to a certain extent. Both are under AVIC however 洪都航空工业集团 is located in 江西 while 成都飞机工业集团 is in 四川. Correct me if I'm wrong.
It’s very good, only things is that it is Chengdu, you wrote Hongdu. Just a small reminder
@CRJ900Pilot Its the same concept. Now thin it down. Style I used for my airliner is exactly the same as the one used here.
It helped for thicc airline wings but not really thin fighter wings @BaconAircraft
@CRJ900Pilot Not really tips. Its just through lots of math and practice. I might make a video explaining the math soon. I streamed quite a bit over the weekend on doing the wings, not sure if that helped.
Oh ok. Any tips on wings though? @BaconAircraft
@CRJ900Pilot Unfortunately not. These wings takes hours upon hours to complete - and i dont have that much free time on my hands.
Would you consider building these type of wings on one of my planes? Also with a sweep wing feature?
Me iPad Can Actually Handle This.
How did I not manage to hit the upvote button?
What is this plane designed to do?
Uh oh 666 downloads
@FranticMatty I built a 1400part fighter and not a 1400part airliner. U happy now?
@Tessemi Oh. Some rather controversial mod.
NCHU献上膝盖