Super difficult by trial and error. Try pulling one of these apart and you'll see @DarthAbhinav

@iDrakeZz Check out the space shuttle!!!

@SpiritusRaptor id like to see you put that big kahuna smoke pod on an aircraft

@RedstoneAeroAviation ok thx

@Elliotmidd07 firstly, put it into your sub assembly and after loading it into subassembly, load your aircraft and use that sub assembly by attaching it anywhere on your build

@SpiritusRaptor oh and almost forgot to mention mechanism is compatible with jet engines

@SpiritusRaptor link 1 my machine with gyro isn't most beautiful but is best at flying and this second link will be where you can get the gyro from. On the second link It will come in the form of a machine attached to the bottom of a heli easy to grab take that as subassembly and then attach it to the bottom of a heli you make with normal props powering it as showing in link 1. After attach use fine tuner to send the machine all to the same y position in side the machine and voila you got a heli. link 2

@SpiritusRaptor yes I'll link you to a heli of mine with it installed to also show you how it works

@Warbrine Definitely! Is it uploaded as yet?

@SpiritusRaptor if you want more awesome gyroscopes I have been devoloping a perfect one lately that blows almost all other gyros out of the water especially my latest design which had the latest gyro running it.

U need to connect is physicly @Elliotmidd07

@Luuk2909 cant find it in my options

Connect it to an cockpit and press AG 1 @Elliotmidd07

These are for use right? I will probaply need them somewere in in the future @SpiritusRaptor

how do i get it up

@ESIOTROT121 Have fun... but umm, a little bit explosive, take care...