No Tags
spawn it in and you will see the problem. yaw to turn. how do i fix this (edit no need to any more)
Specifications
General Characteristics
- Successors 3 airplane(s) +3 bonus
- Created On Android
- Wingspan 12.9ft (3.9m)
- Length 23.0ft (7.0m)
- Height 11.0ft (3.3m)
- Empty Weight 4,837lbs (2,194kg)
- Loaded Weight 5,634lbs (2,555kg)
Performance
- Wing Loading 139.6lbs/ft2 (681.6kg/m2)
- Wing Area 40.4ft2 (3.8m2)
- Drag Points 4645
Parts
- Number of Parts 149
- Control Surfaces 0
- Performance Cost 821
I just posted your craft with the suspension I have. It handle turns much better than before. It rarely flips or tilts. I tuned down the turn angles aswell
You're suspension is too loose. It cant take any level of turn beyond 25% power. I have a basic suspension design that should fit on it.
I tried a bunch of stuff. But either the suspension stiffs out and it rolls or suspension is too soft and it tilts. I rotated the hinges every which way turned the turning radius down, change the fuel tank for fuselage blocks so I know its perfectly even. You might have to make a smaller swing suspension with bigger wheels or of with an independent front and rear swing arm.
first off, you had overlapped fuel tanks then mirrored the aircraft, meaning one tank was not attached on one side, and when it fell off it left the car unbalanced... if you do not want your buggy rolling around as it did, an you still want to keep your current suspension design, i would suggest getting the xml modder and turning the damper on both vertical shocks up to about 10 or 20... you may also want to try lower weight distribution.. you can do this with the xml editor too, just put the engine in the middle of the truck and set the CoM to 0,-2,0 or so. Otherwise change your suspension system to something more stable. hope it helps :)
@piecrazy i think i can help
@EpicFirebird that the wheels bend the way they do for no reason
That the fuel falls out?