Unlisted
No Tags
Auto Credit Based on aircraftarsenal123's Rally Chassis- RACE 4
No description.
Specifications
General Characteristics
- Predecessor Rally Chassis- RACE 4
- Successors 1 airplane(s)
- Created On Mac
- Wingspan 14.4ft (4.4m)
- Length 28.5ft (8.7m)
- Height 9.9ft (3.0m)
- Empty Weight N/A
- Loaded Weight 6,117lbs (2,775kg)
Performance
- Wing Loading 47.2lbs/ft2 (230.7kg/m2)
- Wing Area 129.5ft2 (12.0m2)
- Drag Points 7335
Parts
- Number of Parts 341
- Control Surfaces 0
- Performance Cost 1,678
You might be right @DemonSniper8
@aircraftarsenal123 lol I think this game is mostly for airplanes xD
Alright, I was kinda worried about how a sway bar would work in this game, so I think the best thing to do is just strengthen the springs. The car needs a little body roll to get the weight transferred onto the outward from tire for handling anyway. The real car has double wishbone geometry with push-rod suspension. I've found that this game does not like push rods one bit. @DemonSniper8
@aircraftarsenal123 some aspects are a little finnicky... in real life the bar actually does something, but with how your chassis is and with the game's physics, I don't think a sway bar will help. My advice is to put a gyroscope in, turn the strength all the way up, and make it have no degrees of rotation in any direction. That SHOULD solve your problem, but if not, I can only tell you to make a chassis that is more closely based to one from a regular car.
Hey man, just wondering how things are coming @DemonSniper8
@aircraftarsenal123 oh okay. I think my loteth lxr has upforce, so that's why it goes faster... idk tho
lol, just wings don't do anything, unless they are upside down and set to flat bottom (I've heard its supposed to produce lift going down, but I don't think it works half as well as the normal way.) Oh lol, I'm sure it'll do jumps with that! @DemonSniper8
@aircraftarsenal123 almost done, just a couple more things to finish.
@aircraftarsenal123 if you put a front axle lift kit on, it will do jumps lol
@aircraftarsenal123 ohhhhhhh... So when I have just wings as a splitter it doesn't actually do anything?
For the splitter, thats just 4 or 6 wings tilted down 3.125 degrees or something like that, and the rear wing is tilted at I think 20 degrees. This thing will not do jumps- just nose dives @DemonSniper8
You take a wing (I generally use primary), set the airfoil to symmetric so it doesn't create lift when level, and you tilt it down 1-20º @DemonSniper8
@aircraftarsenal123 how did you make it have downforce? Just wondering if I'm doing things right
The diffuser doesn't do anything, if I added more downforce, then the rear would be slammed at 200 mph
Alright, be mindful though, that the splitter is set to a very specific degree for downforce as well as the rear wing, so just try to replicate them as well as possible- they are active in handling @DemonSniper8
@aircraftarsenal123 Well since you have understeer, I'll tighten the rear bar, but if I tighten it too much it'll ruin the steering. I might have to redo the suspension on the back to accommodate the bar with all your aero on it. I'll be removing all of the aero on the front and back to put the bars in, and then I'll try to get it to line up again.
Is both possible? I've found through hours of suspension tweaking that this car will understeer if the rear is looser than the front, and vice versa with oversteer. @DemonSniper8
@aircraftarsenal123 alright I'll get to work on it later. Do you want the bar in the front or the back?
@DemonSniper8