NicerLiner NL-122
This is an improved Version of my NicerLiner NL-112. First up I added Lights(Beacon,Strobe,etc.)-Group1. Then the improved wings - there are flaps operated with the VTOL bar, and some Ailerons which don't matter, they are just cosmetic the Actual Control Surfaces are on wings inside the Fuselage Blocks. Also I set Activation Groups For the Engines(Left:6;Right:7). Then a smaller downscaled engine for 'Reverse'-Group 4. Then there are no more Pontoons on the Wingtips meaning the Plane will not be that stable on water, but the fuselage has still some Bouyancy to it. And on Group 2 there are the Speed Brakes. Also I doubled the Amount of wheels at the Main Gear and I increased the Suspension Strength at the Nose Gear so the Nose is not lower than the rest of the fuselage - The Rear Axle of the 'Wing Gear' is also turnable when taxiing at or below 5mph. Also I added more flares. And last I scaled down some Blocks in Order to finally have Windows.
Specifications
General Characteristics
- Successors 5 airplane(s)
- Created On Windows
- Wingspan 109.9ft (33.5m)
- Length 117.0ft (35.6m)
- Height 29.4ft (9.0m)
- Empty Weight 37,988lbs (17,231kg)
- Loaded Weight 76,609lbs (34,749kg)
Performance
- Power/Weight Ratio 2.024
- Wing Loading 64.3lbs/ft2 (313.9kg/m2)
- Wing Area 1,191.4ft2 (110.7m2)
- Drag Points 26056
Parts
- Number of Parts 144
- Control Surfaces 7
- Performance Cost 927