Unlisted
No Tags
Auto Credit Based on LotusEngineering's AR AndyCarMKII
I made some MAJOR aero changes, got the drag down to 1777. To do: finish front wing aero, design suspension.
Specifications
General Characteristics
- Predecessor AR AndyCarMKII
- Successors 1 airplane(s)
- Created On Mac
- Wingspan 7.8ft (2.4m)
- Length 23.5ft (7.2m)
- Height 4.7ft (1.4m)
- Empty Weight 1,968lbs (892kg)
- Loaded Weight 2,300lbs (1,043kg)
Performance
- Wing Loading 9.1lbs/ft2 (44.5kg/m2)
- Wing Area 252.3ft2 (23.4m2)
- Drag Points 1777
Parts
- Number of Parts 94
- Control Surfaces 0
- Performance Cost 285
@LotusEngineering I see you've uploaded a successor?
@KingHandspider lol
@Caveman999 @LotusEngineering my Handspidey senses are tingling
Thanks @KingHandspider
Will do! Thanks! @KingHandspider
One thing I would recommend, in addition to what I said earlier, is make the highest rear downforce plate angled 45-65
degrees, and make the DRS acutators 5 degrees less than the plate angle.
@Caveman999 @LotusEngineering Alright, if you can fit them all in the allowed space, you can have them. I will increase the limit shortly, desgin as such.
@KingHandspider yes, 6 per each side.
I think that’s what lotus means. @KingHandspider
@LotusEngineering I think you misunderstand what I mean by "three plates". A wing plate can be made up of at most 2 wing parts, and there may only be three wing plates PER SIDE, not including the main (lowest) deck.
@KingHandspider I've come up with a proposal. For the front wing, I feel very restricted with my possible design. 3 downforce plates. The only thing I'm allowed to change is the length and angle (to a certain degree) of the plates. If you perhaps changed the front wing rules, I could really make a cool as heck wing. heres what Im proposing:
What do you think?
Thanks!
@LotusEngineering ah yess I see
@KingHandspider Oh yes, I just put that there for weight testing. nowhere near being done.
@LotusEngineering Yee! I would however recommend angling the front wing panels down a bit, as they provide little to no downforce as they are right now. (it did a backflip @ ~150 mph XD)
@KingHandspider Thank you my good man!
This is what I wanted an FSGK car to be like. Bravo, Aurora Racing!
@marcox43 @KingHandspider @Caveman999