Turbo Prop Flying Wing M-2
Link to the video I made on this
Info:
This is a fast in nimble plane, powered by a dual prop turbo prop engine in the rear. It is a flying wing design making it fairly easy and simple to control. It has realistic turbo prop and prop pitch characteristics (I go into greater detail on how to use in my video above) it comes equipped with several armaments. It has a fully clickable interior meaning you can interact with all your controls from inside the cockpit. I hope you enjoy, this plane has taken quite a bit of engineering to make work properly.
Controls:
When you take this vehicle out to fly craft instructions will open up automatically and tell you the controls. They are quite simple.
Takeoff procedure:
First lower canopy (Activate8
), then start engine (Activate1
), when you're ready to takeoff increase prop pitch (VTOL
) to 50%, and then increase throttle to 100% (Throttle
), as you get up to higher speed around 300 mph. You can put the prop pitch all the way up to 100%
Notes:
- This vehicle is not a replica of any specific model it is a completely original design
- I designed this plane to handle realistically making it a little harder to fly mainly with the pitch control and engine control.
Enjoy!
Specifications
Spotlights
- 50CalChicken 2.4 years ago
General Characteristics
- Created On Mac
- Wingspan 36.7ft (11.2m)
- Length 42.9ft (13.1m)
- Height 11.6ft (3.5m)
- Empty Weight N/A
- Loaded Weight 12,912lbs (5,857kg)
Performance
- Power/Weight Ratio 6.134
- Horse Power/Weight Ratio 0.309
- Wing Loading 35.9lbs/ft2 (175.5kg/m2)
- Wing Area 359.2ft2 (33.4m2)
- Drag Points 2326
Parts
- Number of Parts 115
- Control Surfaces 6
- Performance Cost 599
@Belloaka yes,it quite is
@50CalChicken yep, it's quite fun to work the prop pitch while in mid air.
@Belloaka I enjoyed flying it as well
@50CalChicken thank you, I enjoyed making it
@HighMike thanks
Ok @Belloaka
Awesome! very well made
@Belloaka nice plane
@HighMike @Brayden1981
@Brayden1981 yes
And @Brayden1981 @Belloaka
@50CalChicken