Four Cylinder Motor Working Prototype
This is the 6th engine I've attempted, and the 2nd working one. Unlike my first one it works without using the autopilot function so the controls are freed up. I've included a sub assembly group for the bearings I used, it's painted purple and orange. Group 2 and throttle to start, Group 1 for cylinders trim to about 50% then deactivate Group 1 and throttle down. The tricking part is getting the trim right so that it will run, there's a very specific area on the trim bar where it will run normally and it's around 50%, I don't think it's exactly 50%, but experiment with it and eventually it will run if you get it before the springs explode ( I recommend replacing the springs with invincible ones using the invincible parts mod and that won't be a problem ). Let me know how it works for you and if you have any suggestions.
Specifications
Spotlights
- RailfanEthan 7.0 years ago
- ColonelStriker 7.0 years ago
- ValtsuAircraftIndustries 7.0 years ago
- DemonSniper8 7.0 years ago
- Patrick20206 7.0 years ago
General Characteristics
- Created On Windows
- Wingspan 44.7ft (13.6m)
- Length 31.6ft (9.6m)
- Height 18.9ft (5.8m)
- Empty Weight 16,774lbs (7,608kg)
- Loaded Weight 18,103lbs (8,211kg)
Performance
- Power/Weight Ratio 3.351
- Wing Loading N/A
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 36429
Parts
- Number of Parts 647
- Control Surfaces 0
- Performance Cost 2,384
@LimitedShelf568 nothing just making a joke
@rockcool what?
@rockcool You should see my new engine lol
Challenge
Some one needs to make a car out of that engine
@RailfanEthan thank you
@lolcreeper45 thank you
Bru that is sick
Sweet beans
@Patrick20206 A wankel will be hard but it's do-able
@Patrick20206 Yeah
Can you make a V8 or a wankel?