no 2 in the series! this time I even included the cockpit frame!
This is a series of replica frames using @Visify 's amazing piston engines! Check him out!
The engines are half of Visify's X 24 with 4 extra cylinders, 12 total.
controls:
- AG1 = nose wheel steering unlock
- VTOL = flaps
- Trim = prop pitch (slide u up between the last 2 notches is optimal)
/!\ These engines can start spinning in reversed direction or blow up if you use slow motion or break when at full throttle, beware.
Hope you enjoy this as much as I do! I will also start needing suggestions soon as I am running out of ideas... I am also experimenting other stuff in preparation for a few big projects that I want to do so the upload rate might not be as fast...
Specifications
Spotlights
- Visify 7.3 years ago
General Characteristics
- Successors 3 airplane(s) +42 bonus
- Created On Windows
- Wingspan 108.1ft (32.9m)
- Length 75.8ft (23.1m)
- Height 24.1ft (7.3m)
- Empty Weight 20,109lbs (9,121kg)
- Loaded Weight 20,109lbs (9,121kg)
Performance
- Wing Loading 13.6lbs/ft2 (66.2kg/m2)
- Wing Area 1,482.0ft2 (137.7m2)
- Drag Points 25339
Parts
- Number of Parts 313
- Control Surfaces 12
- Performance Cost 2,278
@iwannabeelected Thanks! Simple but effective :)
This one works great! And I really like the design
@mikoyanster !nam sknahT
@SSSvaSSa Thanks!
@kerothehero XD no problemo!
@MethaManAircraft U damn right
Sry 4 been late
10 days to replay it's a bit much
But English isn't my first language U know....
Soo I had to know wat U meant by that
And it took a bit 2 much
End the story...
..... That U didn't need to hear
Sry 4 wasting UR time again
XD XP
@kerothehero hehe! beat you to it!
@MethaManAircraft NNOOOOOO!!..
PROBLEM...... XD
@kerothehero thank you!
@CDRxavier thanks! really wanna see the oscillating engine
INVENTED the OSCILLATING ENGINE. Uploads as soon as possible.
@CDRxavier nice!
@MethaManAircraft I also improved the frame so the drag point reduced from a staggering 25339 to a impressive 18223, which make it have a speed while on 80% throttle a staggering 212,mph. As soon as the system let me upload planes, it will be on there. 212 mph? Can't wait!
Wonderful.
@CDRxavier no shouting from me ever!
Cool. Thought you guys will be shouting over some COPYRIGHT problems...
@CDRxavier upload what you've got! public or unlisted, i'll take a look and upvote :)
Oh you DO want me to upload it. I mean, I kinds want to "show off" my TWEAKING skills, but I need a frame sturdy enough to withstand the earth-shaking vibration these make.
@MethaManAircraft I have improved your plane to hit 200mph. Would you mind if I upload it? Just do not want to copy other's idea but cannot build anything more sturdier than your frame.
@HakkeAirTech @AlexRol05 thanks!
@CDRxavier Visify makes the engines, I am also developing my own V 4, 6, 12 engines coming in the near future :)
Thanks for the description of the problem! On my laptop it works fine... can you upload your fixed version as unlisted so that I can take a look at it?
Who made the engine? I'd like to thank him for that.
So I downloaded this plane and I first realized that throttle is not such a good idea on this since a throttle greater than 85 on my device will shatter the engines. So I turn and worked on the blades. I now manage to hit 200 mph with maximum (80%) throttle. The only downside is that it sometimes turn the wrong way and the engine need to be restarted and that it generate a lot of vibration. I was looking for a was to lower the vibration so it can be used on other vehicles. But yeah, use no fuel. Good job.
@Visify kool! that's great!
@Linkyses go ahead!