Auto Credit Based on Aginuzo's Chopped Top
Full credit to Aginuzo for making this awesome car.
All I did was make it fly and boat as well.
Of course, when you take a car out for a fly everyone wants to come along, so a rumble seat was installed to accommodate the extra passengers.
On the ground: Throttle up and steer with roll.
When you want to go faster trim up for the afterburner.
VTOL up is VTOL.
3/4 hash mark is hover.
Pitch and roll makes you changes your orientation.
When you are in the air, hit brake to deactivate ground wheel engine.
While flying, the more trim/afterburner, the less VTOL you will need.
AG1 activates flying flashers.
Have fun.
Specifications
General Characteristics
- Predecessor Chopped Top
- Created On Windows
- Wingspan 10.3ft (3.1m)
- Length 21.3ft (6.5m)
- Height 7.1ft (2.2m)
- Empty Weight 5,719lbs (2,594kg)
- Loaded Weight 12,543lbs (5,689kg)
Performance
- Power/Weight Ratio 1.612
- Wing Loading 3,296.1lbs/ft2 (16,092.9kg/m2)
- Wing Area 3.8ft2 (0.4m2)
- Drag Points 5837
Parts
- Number of Parts 123
- Control Surfaces 0
- Performance Cost 425
@SSSvaSSa thanks. This one's real fun to play with.
@Aginuzo The main thing is the gyro, VTOL engine, 6 VTOL exhaust ports and 2 smallest Jets.
The smallest Jets I resize to fit in the exhaust pipes as well as two fixed rotator VTOL exhaust. Four fixed Rotator VTOL exhaust underneath.
I made the radiator larger and I made most stuff buoyant underneath, added fuel, change the engine to throttle and down to 25 horsepower as well as all four wheels connected to that engine.
Overdrive and fine tuner were needed for resizing the engines and making the VTOL engine power proper so I could get the hover at the three quarter mark. (That right there took the longest time adjusting back and forth.)
I have super hover converted a few different vehicles so I have gotten the procedure down.
Nice, had to see how you did it , well done.