AS355N
I based the colors off a drawing I did as a kid (see picture two)
Wiki: The AS350 is a single engine helicopter, powered either by a Lycoming LTS101 or Turbomeca Arriel powerplant that drives a three-blade main rotor, which is furnished with a Starflex rotor head. The type is known for its high-altitude performance and has seen use by operators in such environments. Both the main and tail rotors make use of composite material and are designed to minimize corrosion and maintenance requirements. The AS350 was also developed to comply with the noise requirements in place in locations such as national parks; the in-cabin noise levels are such that passengers may also readily converse during flight. The aircraft can also be quickly started up and shut down, which is often useful during emergency medical services roles. It is equipped with hydraulically-assisted flight controls; these controls remain operational, albeit operated with greater physical effort, in the event of a hydraulic failure.
Controls:
Throttle: Powers the engine (Throttle to 90%)
AG1: Turn the cockpit/navigation lights on/off
AG2: Open/Close copilot door
AG3: Open/Close pilot door
AG4: Is for the searchlight on the belly under the pilot.
VTOL: Nothing
Trim: Controls the forward movement of the rotor head
Notes: The helicopter tends to yaw the left alittle when you takeoff but only briefly.
Credit to Justpancake as this is his A-Strar. I just made a few changes.
Specifications
Spotlights
- HazeX 3.8 years ago
General Characteristics
- Predecessor AS350 Ecureuil
- Created On Android
- Wingspan 46.1ft (14.0m)
- Length 47.7ft (14.5m)
- Height 16.7ft (5.1m)
- Empty Weight 12,785lbs (5,799kg)
- Loaded Weight 31,248lbs (14,174kg)
Performance
- Power/Weight Ratio 8.558
- Wing Loading 561.3lbs/ft2 (2,740.6kg/m2)
- Wing Area 55.7ft2 (5.2m2)
- Drag Points 7777
Parts
- Number of Parts 630
- Control Surfaces 0
- Performance Cost 1,986
@TimmytheTypicalUser thank you
That drawing is awesome
Good job
@MadeInIndonesia thank you!
Nice, keep up the good work