Made on a phone. Translated from an online translator.

DK-001 is a project of a regional passenger aircraft. It is equipped with two T-1000-2 engines, has a low-lying trapezoidal wing, a rectangular fuselage, a tricycle landing gear, a single-tail tail with two horizontal stabilizers.

AG1 - Enabling the altitude mode autopilot. It is regulated by the trimmer scale (Trim). The "ALT" power button is located on the central dashboard; it lights up green when turned on. The display is displayed on the altimeter of the central dashboard, under the activation button, depending on the selected scale bar. Scale bars (topmost - 1st bar; bottom-5th bar):
1) 6000 m
2) 4500 m
3) 3000 m
4) 1500 m
5) 1000 m
This mode allows you to adjust and maintain the height in the range from 1000 to 6000 meters.
Recommendation (!): Although this mode allows you to occupy a certain height in a possible range, it does not hold the aircraft very correctly. The use of the mode is recommended mainly when the height is set; when lowering, the pitch will be too negative. Also, for more accurate altitude retention, it is recommended to first take the height using the on-board autopilot, and then activate the in-game autopilot.

AG2 - Enabling the horizon hold mode autopilot. The "HR" power button (Horizon Retention) is located on the central dashboard; it lights up green when turned on. This mode keeps the aircraft in a straight position; fends off attempts to increase the roll. Compatible with altitude hold mode.

AG3 - Turning on the autopilot of the course mode. Regulated by the VTOL scale. The "HDG" power button is located on the central dashboard; it lights up green when turned on. The indication is displayed on the compass of the central dashboard, under the activation button, depending on the selected scale bar. Scale bars (topmost - 1st bar; bottom -5th bar):
1) South (S)
2) East (E)
3) North (N)
4) West (W)
5) South (S)
This mode allows you to adjust and hold the direction of flight.

AG4 - Starting the power plant.

AG5 - Release of wing mechanization: flaps for 30° and slats for 10°.

AG6 - The inclusion of strobe lights, navigation, parking and interior lights.

AG7 - Turning on the landing lights.

AG8 - Opening of the ramp.