A simple helicopter concept using VTOL powered blades
---------------------------
Take-off procedure
1-Slide the VTOL all the way forward
2-Turn up the engine full power
3-Engage the blades attack with the Roll control
You can then control the pitch and yaw using the RCNs
-----------------------------
It's very hardly flyeable as is; critically missing the roll control but the point was to know if I could make something to take off using rotating blades
Feel free to edit if you see any improvement!
Specifications
General Characteristics
- Created On Windows
- Wingspan 41.6ft (12.7m)
- Length 8.2ft (2.5m)
- Height 7.4ft (2.3m)
- Empty Weight 3,593lbs (1,630kg)
- Loaded Weight 4,035lbs (1,830kg)
Performance
- Power/Weight Ratio 3.341
- Wing Loading 20.6lbs/ft2 (100.6kg/m2)
- Wing Area 195.8ft2 (18.2m2)
- Drag Points 671
Parts
- Number of Parts 21
- Control Surfaces 4
- Performance Cost 154
Retard may be offensive. I suggest changing the name!
I struggled for ages to attempt this and still failed. Great job.