Helicopter with coaxial rotor. Potential prototype of the future attack helicopter model.

Fuel capacity: 184 gal

Flight time and fuel consumption:
- About 29 minutes and 28 seconds flight time (from the moment of engines start):
- About 3% of fuel needed to start engines (for completely stopped rotor);
- During flight each 1% of fuel is spent per 17,6 seconds.

Additional Equipment:
1 x Beacon Light Slow Blink Style [Activation Group 1]
1 x Beacon Light Steady Blink Style [Activation Group 1]
2 x Flare type Countermeasure Dispenser

How to fly:
1) Start engines (Minimum power value - 25%, throttle input)
2) To take off after engines start, use VTOL input to gaining altitude. Move cursor in the upper position. Don't forget to retract landing gear.
3) To fly, use pitch input, roll input and yaw input. To descend use VTOL input and move cursor to the neutral (central) position direction. It is not recommended move cursor below neutral (central) position level during flight at high altitude.
4) To maintain minimum altitude above flat land surface or flat water surface, use VTOL input and move cursor in position with second from the top mark.
5) To land, use VTOL input and smoothly move cursor in the neutral (central) position. Helicopter will begin to lose altitude slowly. Control your rate of descent! If you need to press on helicopter to landing site move cursor below neutral (central) position.
6) After landing if you need power down engines.

Fly and enjoy!