Paint Challenge
Heres an easy challenge for people. I'm currently undergoing building an RC plane based on this: The Sea Wrench
I want an attractive paint scheme for this aeroplane, one that would make someone look up at the sky.
Rules:
- You cannot change the design, you can remove the parts but have to replace it (removing the tail to make 2 separate tail sections)
- You can't change the paint on the tail, and cowling.
- You can only use the following paints...
Pthalo Blue (recommended colour)
Ultramarine Blue
Crimson Red
Titanium White
Jet Black
Gold
Standard Orange
Silver
Tan
Black
Red Ocre
Grey tape (straight lines)
In Short Supply:
Grey
Camo Green
Dark Grey
Vivids:
Black
Blue
Red
Deadline is at the 31st of May.
You will also be competing with my standard design, The Original Paint scheme on my Sea Wrench.
Idk what the weight is but try to keep the weight down.
I suggest to keep the paint scheme clean but attractive. It should say "Sea Wrench".
I the winner can choose where he (or she, idk if there are any, no harsh feelings), On the 3 chosen spots of the plane.
You can choose either 3-5 props, the props will be be part of your design.
Have fun, go and experiment with different designs. I can Postpone It till 5th of June.
Specifications
General Characteristics
- Predecessor FAC 24 Sea Wrench Mk1a
- Created On Android
- Wingspan 39.4ft (12.0m)
- Length 30.6ft (9.3m)
- Height 13.5ft (4.1m)
- Empty Weight 4,196lbs (1,903kg)
- Loaded Weight 7,447lbs (3,378kg)
Performance
- Power/Weight Ratio 1.81
- Horse Power/Weight Ratio 0.203
- Wing Loading 20.4lbs/ft2 (99.6kg/m2)
- Wing Area 365.1ft2 (33.9m2)
- Drag Points 1059
Parts
- Number of Parts 118
- Control Surfaces 9
- Performance Cost 686
@FearlessAce what's up? what do you need my man.
@SchadeAircaftCompany @lilgreen06 @Trijets