Tutorial on how to coat wings with fuselage blocks to make them look bigger. 1. Make a wing 2. turn a fuselage 90 degrees and place it on the wing 3. reduce its height to 0.5 4. Modify it's characteristics until you get the desired coat. You may need to modify the wing as well to get it perfectly. This one was made in a bit of a hurry, but the principles are the same.
Specifications
General Characteristics
- Created On Android
- Wingspan 14.8ft (4.5m)
- Length 41.0ft (12.5m)
- Height 4.1ft (1.3m)
- Empty Weight 782lbs (354kg)
- Loaded Weight 3,861lbs (1,751kg)
Performance
- Wing Loading 26.6lbs/ft2 (129.7kg/m2)
- Wing Area 145.3ft2 (13.5m2)
- Drag Points 2733
Parts
- Number of Parts 16
- Control Surfaces 4
- Performance Cost 70
@Umbreon it doesn't but its a lot easier and more precise with xml modding
How do you know what's in my mind?? XD I was using this technique on my J-1 Crescent Wing, but I didn't coat all of the wing, since the wing is gigantic. So I decided to coat only the nearest part from the body.
Thanks!
For some reason, quite a few people think this requires modding.