Profile image

HELP!!

170 ChiefMcGill  8.7 years ago
31 downloads

what am I doing wrong! it won't fly straight! it is my first attempt at a helicopter!

General Characteristics

  • Successors 1 airplane(s)
  • Created On Android
  • Wingspan 11.2ft (3.4m)
  • Length 17.3ft (5.3m)
  • Height 9.2ft (2.8m)
  • Empty Weight 2,788lbs (1,265kg)
  • Loaded Weight 4,567lbs (2,071kg)

Performance

  • Horse Power/Weight Ratio 0.656
  • Wing Loading 61.2lbs/ft2 (298.7kg/m2)
  • Wing Area 74.7ft2 (6.9m2)
  • Drag Points 1408

Parts

  • Number of Parts 27
  • Control Surfaces 5
  • Performance Cost 137
  • Log in to leave a comment
  • Profile image

    Hey everyone! Thanks for the help! Here's the fix. Autopilot still messes it up though but with a bit of effort I can at least fly it: https://www.simpleplanes.com/a/U4dh7t/Chief-Chopper

    8.7 years ago
  • Profile image

    OK giving it a fixed pitch of +10 really helps, not perfect though

    8.7 years ago
  • Profile image

    @TheFlyingCompany I've tried (using two engines on top, it looks like I micro Chinook) but now it goes into a flat spin.

    8.7 years ago
  • Profile image
    2,593 mbmadnes32

    I believe so but if you practice it will get easier I will upload a little later a helicopter that should be easy to fly I'm almost done I just got to get the paint right lol

    8.7 years ago
  • Profile image

    @mbmadnes32 lol it seems part of the problem is my lack of flying skills, I can't fly either of your helicopters. But then neither can the autopilot... Is this a general problem with choppers?

    8.7 years ago
  • Profile image
    23.7k GrimMantis

    You just have too adjust it and put down some more fusologes if needed @ChiefMcGill

    8.7 years ago
  • Profile image

    line up the centre of mass with centre of thrust and lift

    8.7 years ago
  • Profile image
    3,827 planes223

    @ChiefMcGill yup

    8.7 years ago
  • Profile image

    @GrimMantis there's a 150lbs in the front nose cone, if I put 100lbs it back flips and if I put 200lbs it just drives more sharply.

    8.7 years ago
  • Profile image
    23.7k GrimMantis

    Try moving the center of mass by putting deadweight in some of the fusolages@ChiefMcGill

    8.7 years ago
  • Profile image
    2,593 mbmadnes32

    Look at my helicopters and see what I did

    8.7 years ago
  • Profile image

    @GrimMantis it tips forward and moves forward without the rear prop, then it just drives into the ground

    8.7 years ago
  • Profile image
    23.7k GrimMantis

    @ChiefMcGill try putting the back proppeler on group 1 so you can activate it when you want to move fowards

    8.7 years ago
  • Profile image

    @planes223 that bad?

    8.7 years ago
  • Profile image
    3,827 planes223

    i tried

    8.7 years ago
  • Profile image

    @GrimMantis I don't think takeoff is the problem, I want it to have vertical takeoff and landing anyway, like a real chopper.

    8.7 years ago
  • Profile image
    23.7k GrimMantis

    @ChiefMcGill try putting wheels on it for better land take off

    8.7 years ago
  • Profile image

    @AceOfSpade thanks

    8.7 years ago
  • Profile image
    5,698 AceOfSpade

    Will help out.

    8.7 years ago
  • Profile image

    @GrimMantis thanks man! I've tried everything and this seems to be the best I can do, I feel like I'm missing something major

    8.7 years ago
  • Profile image
    23.7k GrimMantis

    I am not sure how to fix this but I will upvote for support @ChiefMcGill

    8.7 years ago
  • Profile image

    @planes223 yeah thanks!

    8.7 years ago
  • Profile image
    3,827 planes223

    ill help

    8.7 years ago