Help Needed!
6,509 PattyMilk6
4.4 years ago
Auto Credit Based on PattyMilk6's (Seaplane) Heavy I main body installed (with change reigens)
Ok so fly around with this, and youll notice some things. I just need help to make it fly well. Im not good at areodynamics or stuff, so if someone could make this fly well, you would earn my everlasting gratitude!
Specifications
General Characteristics
- Predecessor (Seaplane) Heavy I main body installed (with change reigens)
- Created On iOS
- Wingspan 45.8ft (14.0m)
- Length 44.1ft (13.4m)
- Height 17.6ft (5.4m)
- Empty Weight 19,336lbs (8,771kg)
- Loaded Weight 35,278lbs (16,001kg)
Performance
- Horse Power/Weight Ratio 0.056
- Wing Loading 114.7lbs/ft2 (560.2kg/m2)
- Wing Area 307.4ft2 (28.6m2)
- Drag Points 9291
Parts
- Number of Parts 146
- Control Surfaces 5
- Performance Cost 435
Make sure to balance out the pontoons! Remove the weight from them! @L3dg3ndary
HEY
All done! I’ve uploaded it for you, should be good let me know if you need any help btw. @KettleKip
@KettleKip Hey bud, It's nearly done, I lowered to weight from 16 tonne to around 6 tonne or so, It takes off at around 280kmh do you want me to try to lower the take off speed?
Thanks! @Alta2809
Yeah, I’m fixing the whole thing for you, will upload unlisted and tag you soon. @KettleKip
Thanks about the wings! But look at the pin for the tube problem@Alta2809
2 things, you can’t have weight in the tubes, and your drag is still going on in the fuselages on the wings, therefore the wings don’t work, and the tubes are heavy in one side of the plane.
Ooooo yea i forgot, i do mirror, but that still never fixes it. I thought it was bc of hi com so i put weight into the pontoons @Ouroboros
The problem is that you didn't mirror from left to right
For example
The left pontoon had max fuel and max weight while the right one didn't
Try balancing both of those out and it probably would fly normally
Also reduce the weight, it's extremely heavy for a civilian aircraft like this
Hope these points help you out
Mmmmm@L3dg3ndary
I will help @CobraHueyIndustries
I gotchu
Coolio!