A mobile friendly MV-22. It’s easy to control after a while. Just follow the steps below and you’ll be in the air before you know it.

GROUP CONTROLS
1: Flaperon activation
2: Nacelle control
3: Gyro for leveling out aircraft
4: Fuel Probe.
5: Nav Lights
6: Flaps.
7: Engine Start @ 5%
8: Flight controls for helicopter mode

NOTE
Nacelle movement, fuel probe, and engine start all share the throttle control. Best to use each group individually. Group 6 uses trim control for actuation. Best way to use it is trim down before take off and turn off 6 to use trim. Group 1 activates the flaperon actuation. Best to have on when flaps are level.

STARTUP AS FOLLOWS
Press 3 and 5. Press 6 and trim down for flaps. Turn off 6 and reset trim control.
Press 7 and throttle to 5%. Turn off 7 and reset throttle to 0%.
Turn on 2 for full nacelle movement using throttle control.
Collective and thrust is VTOL control.
Once in the air, slowly transition nacelles from 0% to 100%. At the same time, turn on 6 and bring up flaps, then turn off once level.
Turn on 1 for roll
Turn off 8
Turn off 3 for sharper turns.
Do all this in reverse on final.
Keep nose pointed up about 8°-10° for maximum speed like the real Osprey.