Profile image

P-730F Butterknife

26.3k BRuthless  8.8 years ago

The armed version of the P-730 Butterfly. It is non-modded and has high firepower, high acceleration, high speed and high agility. Probably one of the best prop-fighters you've ever seen.

General Characteristics

  • Created On Windows
  • Wingspan 21.1ft (6.4m)
  • Length 30.0ft (9.1m)
  • Height 10.1ft (3.1m)
  • Empty Weight 3,274lbs (1,485kg)
  • Loaded Weight 4,558lbs (2,067kg)

Performance

  • Horse Power/Weight Ratio 0.658
  • Wing Loading 22.8lbs/ft2 (111.5kg/m2)
  • Wing Area 199.6ft2 (18.5m2)
  • Drag Points 339

Parts

  • Number of Parts 43
  • Control Surfaces 11
  • Performance Cost 230
  • Log in to leave a comment
  • Profile image
    26.3k BRuthless

    @royalnoob Maybe I could make it land on water with float-blocks. It's very lightweight, so it doesn't need many of them. :D

    8.8 years ago
  • Profile image

    @BRuthless haha ok after all of that

    8.8 years ago
  • Profile image
    26.3k BRuthless

    @royalnoob Well, I've tried, but it is pretty unstable in flight with the extension arms and because the weight of the plane is way above the landing gear, it always wants to tip over. Now I've got the confirmation that it was right going without landing gear for a prop plane racer. :D You might add landing gear by yourself, but I wouldn't recommend it and wouldn't upload it. :)

    8.8 years ago
  • Profile image
    26.3k BRuthless

    @royalnoob Because of the rotors I have to make extensions for the landing gear. Those look very ugly, no matter how I make them. :D And also it adds drag, reducing speed and acceleration.

    8.8 years ago
  • Profile image
    26.3k BRuthless

    @royalnoob No, I meant the reason why you want one. :D I'd use the P-731 as base instead. It's more stable, more reliable and faster.

    8.8 years ago
  • Profile image

    @BRuthless o̤̮f̤̮ c̤̮o̤̮ṳ̮r̤̮s̤̮e̤̮ I̤̮ w̤̮o̤̮ṳ̮l̤̮d̤̮ a̤̮n̤̮d̤̮ I̤̮ t̤̮h̤̮i̤̮n̤̮k̤̮ s̤̮o̤̮ w̤̮o̤̮ṳ̮l̤̮d̤̮ o̤̮t̤̮h̤̮e̤̮r̤̮ p̤̮e̤̮o̤̮p̤̮l̤̮e̤̮

    8.8 years ago
  • Profile image
    26.3k BRuthless

    @royalnoob Didn't plan it yet, but it wouldn't be a problem. Just some minutes with testing. Why would you want one? :D

    8.8 years ago
  • Profile image

    @BRuthless I̤̮ s̤̮e̤̮e̤̮ o̤̮k̤̮ t̤̮h̤̮e̤̮n̤̮. d̤̮o̤̮ y̤̮o̤̮ṳ̮ p̤̮l̤̮a̤̮n̤̮ t̤̮o̤̮ m̤̮a̤̮k̤̮e̤̮ a̤̮ v̤̮e̤̮r̤̮s̤̮i̤̮o̤̮n̤̮ w̤̮i̤̮t̤̮h̤̮ l̤̮a̤̮n̤̮d̤̮i̤̮n̤̮g̤̮ g̤̮e̤̮a̤̮r̤̮?

    8.8 years ago
  • Profile image
    26.3k BRuthless

    @SteadfastContracting Thanks! This was actually made without that much testing in dogfighting, it is intended as a racer (the P-730 Butterfly, which I also uploaded). I improved the dogfighting version a little bit now and it's getting quite good results, but I'll only upload a new version after also improving maneuverability a bit, as there are no rings to miss in a dogfight. :D

    8.8 years ago
  • Profile image

    Why does everybody have to be so good at this?

    8.8 years ago
  • Profile image
    26.3k BRuthless

    @royalnoob It is not needed in the Tournament on the Shark Tooth course and also not needed in any dogfight. It saves weight and drag having no landing gear. :D Has to be started in the air.

    8.8 years ago
  • Profile image

    Where is the landing gear?

    8.8 years ago