Auto Credit Based on BeeEngineer's Trainer Challenge (Closed)
A french trainer designed by George Kumphalf. It was designed to break cessna’s monopoly. It was equipped with many desirable features, but still was not able to beat cessna.
Specifications
General Characteristics
- Predecessor Trainer Challenge (Closed)
- Created On iOS
- Wingspan 44.4ft (13.5m)
- Length 22.2ft (6.8m)
- Height 13.2ft (4.0m)
- Empty Weight 3,668lbs (1,663kg)
- Loaded Weight 4,167lbs (1,890kg)
Performance
- Horse Power/Weight Ratio 0.188
- Wing Loading 22.0lbs/ft2 (107.2kg/m2)
- Wing Area 189.8ft2 (17.6m2)
- Drag Points 5956
Parts
- Number of Parts 123
- Control Surfaces 7
- Performance Cost 579
@ja380atme
thanks
@Dogedogebread13 I actually quite like it- it provides a bit of a challenge and is a bit more realistic :)
@ja380atme
when I made this I wasnt very good at making them have good flight preformance
Fun plane to fly (even if it lacks the most desirable flight performance 😂) and very nicely modelled :).
@CLAZZcompany
This was my first vr compatible plane
Mmmmmmm
Nice
probably should add the vr tag
@BeeEngineer
M
@dogooman1 Unfortunately, you are no longer in 1st place.
@dogooman1 ok
@BeeEngineer
I know it is meant as a emergency floats if the case needs arise
@dogooman1 The landing gear doesn't float though.
On the engine it is slow but unless you’re flying up then it shouldn’t stall
@BeeEngineer
It is, just look at it
@dogooman1 Also the landing gear isn't buoyant.
@dogooman1 I meant with engine on.
@BeeEngineer
Activate 2
@dogooman1 It was at full throttle.
@BeeEngineer
You need to make sure the engine is on
@dogooman1 I think it looks pretty good but I can't fly without stalling unless I have the flaps down.
@BeeEngineer
I actually tested this by telling my friend who barely knows what a propeller is fly this
@dogooman1 However, you are in first place currently!
@BeeEngineer
Seeing as I'm not that good, this was expected
looks 3.5/10. Functionality 6/10. Performance 2.5/10. 12/30